Main Features
|
Kent Marine Maxxima RO/DI System features:
- Disposable Mixed Bed Resin Cartridge
- Carbon Block Pre-Filter
- 1 Micron Sediment Pre-Filter
- Available in 24 GPD and 50 GPD
- Deionizing resin with a color change indicater to indicate when you need to replace the DI resin
- GPD: 24
The MAX24 is a 4 stage 24 gallon per day RO/DI unit with clear canisters. These filters will provide the purest water possible. This unit will remove over 99.9% of tap water contaminants, providing 18 megohm-cm lab grade water. The MAX24 includes a 24 gallon per day TFC membrane, a CF1M 1 micron sediment filter, 1 CFCE solid block carbon pre filter, and a CFI high grade mixed bed deionization resin filter that color indicates as the resin exhausts. This unit also includes a 3/4 inch garden hose adapter and 6 feet of yellow, blue and orange tubing.
This unit can be run on ANY water system.
Specifications:
- Length: 14 1/2"
- Width: 7"
- Height: 15 1/2"
- Dry weight: 15 lbs
- Optimal input water temp: 70–77°F, 21–25°C
- Optimal PSI: 65
- Optimal Total Dissolved Solids: <200 ppm
- Input water type: Any water system
- Membrane type: TFC
- Rated Gallons Per Day: 24
- Waste to Product ratio: 3 to 1
- Inhibiting/Damaging tap water chemicals: Iron, Calcium, Magnesium, Heavy Sediment
- Prefilter media: CF1M: 10", 1 micron, string wound sediment filter, CFCE: 10", 10µ, Solid carbon block Post filter media: CFI, Mixed bed deionization cartridge
- Supplied input water adapter: Garden Hose Adapter, ¾" standard thread
- Tubing type: ¼" pressure tubing
- Filter change times
NOTE: change times are varied depending on the tap water conditions.
Stated times are an average: TFC membrane: 3 to 5 years, CF1M: 6 months, CFCE: 3,500 gallons or 6 months, CFI: around 400 gallons.
|
|
|
|
Customer Reviews
|
Write a review
|
4 of 4 people found the following review helpful:
|
Excellent!
|
|
Good to go
by PAUL MILANA
|
|
Experience Level: Intermediate
|
|
Posted on 7/25/2008 from PLAINVIEW, NY UNITED STATES
|
|
|
Comments: After being in the hobby for 4 years I finally smartened up and threw away the water conditioner and purchased an RO/DI system. Everything is working as advertised and the setup and instructions were spot on. Funny story, I thought the output had decreased after about the first 20 gallons until I realized the reservoir I was using at that point had a hole in it. Small flood but at least the water on the floor was clean!
Yes, I would recommend this product to my friends.
|
1 of 1 people found the following review helpful:
|
|
Excellent!
|
|
RO/DI Unit
by EDDIE LOTTI
|
|
Experience Level: Beginner
|
|
Posted on 1/6/2008 from MARTINEZ, CA UNITED STATES
|
|
|
Comments: Pros= it works as advertised, I would tell my friends about it easy hook up.
cons=none
Yes, I would recommend this product to my friends.
|
|
|
|
Similar Items
|
|
|
|
Product:
|
|
List Price:
|
|
Our Price:
|
|
|
|
Rating:
|
|
Item Code:
|
|
Description:
|
|
|
|
|
|
|
SpectraPure® Maxpure RO/DI System
|
|
N/A
|
|
$159.99 to $259.99
|
|
|
|
|
|
SpectraPure® MaxPure MPDI Systems incorporate high-flow high-rejection TFC membranes, a 1 micron sediment filter, a 10 micron carbon block filter, and a custom formulated 10” color-change DI
|
|
|
|
|
|