1-800-566-3474

150 Watt 20000K+ Metal Halide Bulb - Ushio, Double Ended

Read 5 Reviews Write a Review

In Stock: Order by 2PM EST for same-day shipping (M-F)

This item is in stock in our East and West Coast warehouses

$59.99 $98.95
You Save: $38.96 (39%)


MB2863

Add to Wishlist

SHIPS FREE!

Ushio

We offer a wide variety of Metal Halide bulb choices to suit your aquarium lighting needs.

A Metal Halide Lamp is a high-intensity discharge light source in which the light is produced by the radiation from mercury, plus halides of metals such as sodium, scandium, indium, and dysprosium. The K at the end of color rating for each bulb stands for Kelvin. This is a measurement of the color temperature. The higher the Kelvin rating, the cooler (bluer) the color of light given off by the bulb. In general, the color given off by the 10,000K German is interpreted as being a perfect white color.

There are two main considerations to decide upon when chosing Metal Halide bulbs and systems: wattage and color temperature.

  1. There are generally two considerations when planning wattage, tank depth and the requirements of various types of corals. Tanks 18" and shorter will, typically, use 175 or 250 watt MH bulbs. Typically, tanks 24" and over will use 400 watt MH bulbs. I have found most soft and large-polyped-stony corals to do just fine within 5-15 inches from a 175 watt bulb and 10-24 inches from a 400 watt bulb. Most small-polyped-stony corals survive within 5-10 inches from a 175 watt but appear to thrive within 5-15 inches of 250 and 400 watt bulbs. These are all just general statements to assist in going the correct route with chosing wattage. They are not absolute truths.
  2. Color temperature is a hotly debated topic where there is no one recommendation that will fit everybody. Lowers Kelvin temperatures are yellower and greener colors while higher Kelvin temperatures are whiter and bluer colors. There are two factors that determine most hobbysts choice of bulb colors, par rating and aesthetics. The 6500K Iwasaki bulb is generally regarded as an excellent PAR rated bulb. However, it`s green tinged yellowish color makes for what is considered by many as poor aesthetics. This is not the say the much bluer 20,000K German bulb is aesthetically ideal. Many hobbyists complain this bulb is too blue. By far, the bulbs most popularly purchased are the 10,000K German and the 12,000K Sunburst bulbs. The majority of hobbyists choose aesthetics as the determining factor of chosing color temperature for the primary reason that the appearance of our aquariums is of utmost importance. Due to the subjective nature of color preference, we refrain from making suggestions on which color temperature is right for you. Instead, we have a visual bulb comparison of the popular bulbs on the market.
As a general rule of thumb, use one metal halide bulb for 24" of tank length. Most of the Metal Halide bulbs in the same wattage format can be interchanged. However, please contact us to make sure. Metal Halide bulbs are one the most difficult aspects of the hobby to recommend. Most of the information here is general.

Common questions/problems concerning metal halide lamps:
  1. Metal halide lamps of the same kind are different colors?
    Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps.
  2. The metal halide lamp fires and then either burns dull or the arc extinguishes?
    Usually the ballast and lamp are not receiving enough power. Metal halides pull a high current. Usually the problem is either there is too great a load on the circuit or the extension cords are of a small wire size and can`t handle the power needed by the ballast. Use only heavy duty extension cords and try running a ballast off a circuit from another part of the house.
  3. Do I need a cover shield between the lamp and the aquarium?
    Metal halide lamps produce a large amount of UV and also have a potential of exploding. The single ended metal halide lamps have an outer jacket which eliminates most of the UV. However, they have an inherent risk of exploding and UL requires metal halide lamps to be enclosed. On double ended lamps there is no UV shield. Double ended lamps must have a glass shield or major eye injuries including blindness may occur.
  4. Can I operate a ballast and lamp together which are designed for different wattages?
    Each wattage lamp and ballast are designed together for optimal performance and safety. If you over drive the lamp it may explode and shorten the life of the ballast and lamps. If you under drive the lamp it will also shorten the life of both components and also may explode. Do not mix different type wattages of lamps and ballasts.
NOTE: Double ended bulbs should always be used with the UV shield (supplied). Your corals can suffer from excess UV radiation otherwise. The bulb should be handled carefully as well since it has no outer glass casing. Using soft gloves is a good idea to keep finger prints off bulb. This is during installation and replacement.

Bulb Replacement Guide
Bulb Types Life of Bulb*
Normal Output Fluorescent 6-12 months
Very High Output (VHO) 6-12 months
Power Compact (PC) 9-12 months
T5 High Output (T5HO) 9-18 months
Metal Halide 9-12 months
LED (non-moonlight) ~5 years (50,000 hours)
* Manufacturer Recommendations



Product Manuals & Documentation

150 Watt 20000K+ Metal Halide Bulb - Ushio, Double Ended

Owner's Manual available for download in Adobe PDF file format

Manufacturer Info

Ushio
Since the North American operations began in 1967, it has been USHIO America, Inc.`s charter to provide customers with unrivaled customer service. With over 4,000 products in their portfolio, from unique specialty light sources for critically important and demanding applications, to general illumination lamps for architectural and task lighting, USHIO has earned worldwide respect as a company that delivers on its promise to meet the world`s lighting needs.


Warranty

9 month pro-rated warranty

CHRISTOPHER DEXTER from WEST CHESTER, OH UNITED STATES

09/18/2016

Experience Level: Intermediate

not bad

This bulb did bring out some different colors in my coral compared to the 14k bulb I was running but it does seem dimmer than the 14k bulb.

Was this review helpful?

MARC UNGARO from LAND O LAKES, FL UNITED STATES

06/26/2016

Experience Level: Intermediate

Awesome bulb!

I've had this for a couple months now and it makes my corals glow...a huge difference from ushio 14k bulb I was using.

Was this review helpful?

MICHAEL HENSEL from LAS VEGAS, NV UNITED STATES

04/17/2016

Experience Level: Expert

Great sub for XM 15k

I was using XM 15K, getting good growth and color. I always thought the XM bulbs were cheaply made. They're hard to get in the fixtures and they miss fire frequently. I tried the Ushio 20K and it looks exactly the same. It also seems to be more robust and higher quality build too.

Was this review helpful?

JOEL KOENIG from Cape Coral, FL UNITED STATES

12/13/2015

Experience Level: Expert

very nice

Just installed these and they look great! Was using xm but they are no longer around. these look just as good if not better and they are priced lower. Thumbs up.

Was this review helpful?

BILL SAWYER from GRAFTON, OH UNITED STATES

07/10/2015

Experience Level: Intermediate

reefman

love the color from these bulbs,others seem to be to bright for me.. great service and fast shipping, well packed also...

Was this review helpful?