1-800-566-3474

6 Outlet Hexo-Manifold

Read 5 Reviews Write a Review


CO3175

This item has been discontinued.

Six (6) Outlet Hexo-Manifold

This manifold allows you to dispense CO2 to six different tanks with just one CO2 bottle and one CO2 regulator. It can be used in-line, or threaded (1/8" NPT) directly on to the CO2 regulator. A precision needle valve is attached to each outlet for precise control.



**Variations of this product can be found in many online stores. The version we carry is of the highest quality. Although this item is eligible for price matching under our Low Price Guarantee, please be certain the product you want to price match is the same make and model.

Reef Daddy from ENGLEWOOD, CO UNITED STATES

04/24/2013

Experience Level: Expert

short extension

The manifold itself is well made and a great idea, but they provide this little short extension to attach it to the output of the regulator that isn't long enough. You can't attach it to most regulators because the needle valves hit the pressure gauge when you try to screw it on If they would have spent another 25 cents to provide an extension that was 1/2" longer this item would actually be great! If they would have tried to use their own product with a few different regulators they would have foreseen this!

Was this review helpful?

HTLai from Dallas, TX UNITED STATES

08/09/2012

Experience Level: Intermediate

Good enough

Good product. Only way to install this is connect it on top of the bubble counter in order to avoid CO2 meters.

Was this review helpful?

SCOTT STEINER from Junction City, KS UNITED STATE

06/29/2012

Experience Level: Intermediate

Perfect

I bought this so I could send co2 to a couple other tanks. So far it has worked out well within the few months I have used it. Basically to install this manifold you need to unscrew the old needle valve from the regulator and screw this one in. It makes it a lot easier if you have an adjustable C wrench to loosen and tighten the manifolds threads as you are installing it. The only things that I did not really like about this manifold was getting the threads lined up with the regulators threads was a bit difficult. And the metal finish seems to be kind of delicate because it has chipped where I have used a wrench to tighten it. But overall this has saved me lots of time and money because instead of having to buy separate co2 systems for all my tanks I can use one and run lines to all of them. I would Recommend this product.

Was this review helpful?

CHAD from BUFFALO GROVE, IL UNITED STATE

02/17/2010

Experience Level: Expert

6 Outlet Hexo-Manifold

I have been trying to splice my CO2 out of my one 5lb. tank for a while. I have tried using a brass T-valve and I could not get the control that I needed. I then tried using a 4-Way Aquarium Air Valve Gange Manifold Air Splitter. It leaked because it was not designed for high pressure and I lost all my CO2 that was in the tank. I finally purchased the 6 Outlet Hexo-Manifold from Marine Depot and got the results that I was looking for. Very easy to attach to my solenoid, I just removed the single needle valve and replaced it with the new 6 Outlet Hexo-Manifold and I was all set up to supply all my tanks with the exact CO2 that they need. It only took me a few minutes to set the whole thing up. I give this product an A+++

2 out of 2 found this review helpful

Was this review helpful?

Charles from

Great CO2 Micro Valve

This has to be one of the best Micro Valves available on the market today. It is affordable and is pin-point accurate. One of the valves goes into a 2" square tank.

4 out of 5 found this review helpful

Was this review helpful?

Accessories for 6 Outlet Hexo-Manifold


Similar Items