Aqua Medic Reducing Tee

0 of 0 people found the following review helpful:

Excellent!

Plastic by C DOWLING

Experience Level: Beginner

Posted on 3/16/2009 from ERIE, CO UNITED STATES

Comments: It's a sturdy piece of plastic. Not much more to say. Yes, I would recommend this product to my friends.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Excellent!

Finally by BRENDAN WALSH

Experience Level: Intermediate

Posted on 11/2/2008 from ST LOUIS, MO UNITED STATES

Comments: Great little piece of plumbing. I'm running the line to my calcium reactor with this off of a 1/2 I.D. line thats supplying a separate media reactor. Nice and tidy and only need 1 pump now for both reactors. The other option was using the Toms aquatic aqua lifter pump to supply the calcium reactor but this option wins hands down (less pumps = less things that could go wrong). Yes, I would recommend this product to my friends.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Average

My mistake. by BRENDAN WALSH

Experience Level: Intermediate

Posted on 10/26/2008 from ST LOUIS, MO UNITED STATES

Comments: What can I say, its a piece of plastic plumbing. As well made as any other plastic parts found at home depot. It would be nice if the metric conversion to inches (internal and not outer diameter tubing) was a little clearer right on the product description. The 12mm works for 1/4" I.D. tubing and the 15mm works for 1/2" I.D. tubing. I had to send the 12mm back to exchange for the 15mm. Wound up costing me quite a bit in shipping just for this simple piece which is almost impossible to find anywhere else. Yes, I would recommend this product to my friends.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Below Average

Broke on installing by DREW H YOUNG

Experience Level: Expert

Posted on 6/27/2008 from GREENSBORO, NC UNITED STATES

Comments: Was going to hookup to calcium reactor instead of gravity feed from overflow. Airline tube tube snapped with little pressure. Does fit 3/4" tube. May retry in the future more carefully. Yes, I would recommend this product to my friends.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Excellent!

Nitrate Reductor Tee by BRUCE SANFORD

Experience Level: Intermediate

Posted on 2/9/2008 from NORWALK, OH UNITED STATES

Comments: This is the tee seen in the instructions of Aqua Mdic's Nitrate Reductor. If you are choosing the dosing pump, which comes with the reductor, or this tee as a way to get tank water into the reductor, the tee wins hands down for ease of use and delivering more water than the pump. Yes, I would recommend this product to my friends.

Was this review helpful to you?

1 of 1 people found the following review helpful:

Excellent!

Perfect for Calcium Reactor by rayray

Experience Level: Intermediate

Posted on 11/30/2007

Comments: Made using my Korralin C1502 calcium reactor so much easier. Now inlet connections are in the sump, the reactor is pressurized and I have piece of mind there will be no leaks. Yes, I would recommend this product to my friends.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Excellent!

Works by DAVID JOHNSON

Experience Level: Intermediate

Posted on 8/13/2007 from NEWBURY PARK, CA UNITED STATES

Comments: Not much to say.. it works as advertised. Connected it with hose clamps and forgot about it... Yes, I would recommend this product to my friends.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Excellent!

Aqua Medic Reducing Tee by Bubba

Comments: This was a great find to set up the Korallin calcium reactor to run pressurized. Yes, I would recommend this product to my friends.

Was this review helpful to you?