Measures nitrate levels in both fresh & saltwater aquariums. Tests nitrate levels from 0 to 160 ppm. 90 tests per kit.
Freshwater/Saltwater Nitrate Test Instructions:
Why Test For Nitrate?
Nitrate (NO3-) is produced in the aquarium by the biological filter. Beneficial bacteria in the biological filter convert toxic ammonia and nitrite into nitrate. A high nitrate level indicates a build-up of fish waste and organic compounds, resulting in poor water quality and contributing to the likelihood of fish disease. Excessive nitrate also provides a nitrogen source that can stimulate algal blooms. In the opinion of many aquarists, maintaining a low nitrate level improves the health of fish and invertebrates.
Testing Tips:
This test kit reads total nitrate (NO3-) level in parts per million (ppm) which are equivalent to milligrams per liter (mg/L) from 0 ppm to 160 ppm, in either fresh or saltwater aquariums. This kit includes two Nitrate Test Color Charts — one for freshwater aquariums, and one for saltwater aquariums — so be sure to use the correct chart for your type of aquarium when interpreting test results. The Freshwater Nitrate Test Color Chart is the appropriate chart to use for testing freshwater aquariums to which salt has been added. This test kit measures nitrate as nitrate ion or “total nitrate.” Other nitrate test kits that measure “nitrate-nitrogen” (NO3-N) will give readings 4.4 times LESS than this test kit.
Directions for Testing Nitrate:
- Read thoroughly before testing. Do not allow Test Solutions to get into aquarium.
- To remove childproof safety cap: With one hand, push red tab left with thumb while unscrewing cap with free hand.
- Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).
- Add 10 drops from Nitrate Test Solution Bottle # 1, holding dropper bottle upside down in a completely vertical position to assure uniformity of drops added to the water sample.
- Cap the test tube and invert tube several times to mix solution. Do not hold finger over the open end of the tube, as this may affect test results.
- Vigorously shake the Nitrate Test Solution Bottle # 2 for at least 30 seconds. This step is extremely important to insure accuracy of test results.
- Now add 10 drops from Nitrate Test Solution Bottle #2, holding dropper bottle upside down in a completely vertical position to assure uniformity of drops to the water sample.
- Cap the test tube and shake vigorously for one minute. This step is extremely important to insure accuracy of test results.
- Wait five minutes for the color to develop.
- Read the test results by matching the color of the solution against those on the Nitrate Test Color Chart. The tube should be viewed against the white area beside the color chart. Color comparisons are best made in a well-lit area. The closest match indicates the ppm (mg/L) of nitrate in the water sample. Rinse the test tube with clean water after each use.
What The Test Results Mean:
In new freshwater and saltwater aquariums the nitrate level will gradually climb as the biological filter becomes established. A nitrate level of 40 ppm (mg/L) or less is recommended for freshwater aquariums. Many marine aquarists prefer to keep nitrate levels as low as possible, especially when keeping invertebrates.
Monitoring Nitrate Levels:
Regular testing for nitrate is an essential part of routine aquarium maintenance. Aquarium water should be tested for nitrate once a week to make sure the nitrate does not reach an undesirable level.
Reducing Nitrate in the Aquarium:
In Freshwater
Use Aquarium Pharmaceuticals Nitra-Zorb™ to remove nitrate from freshwater aquariums. Nitra-Zorb is a rechargeable filtration material that removes nitrate from freshwater. Making partial water changes can also help reduce the nitrate level, especially if the initial nitrate level is very high. However, because many tap water supplies contain nitrate, it can be difficult to lower nitrate levels by this method. Aquarium Pharmaceuticals Tap Water Purifier will remove all pollutants, including nitrate, from tap water, making water changes effective. The Tap Water Purifier makes any tap water perfect aquarium water.
In Saltwater
Partial water changes are the easiest way to lower the nitrate in a saltwater aquarium. Keep in mind, however, that the biological filter constantly produces nitrate. Also, because many tap water supplies contain nitrate, it can be difficult to lower nitrate levels by this method. Aquarium Pharmaceuticals Tap Water Purifier will remove all pollutants, including nitrate, from the tap water— making water changes effective. The Tap Water Purifier makes any tap water perfect aquarium water.
DANGER:
- HARMFUL Xn & CORROSIVE C
- Bottle #1 contains 41% Hydrochloric acid
- Causes burns
- Irritating to respiratory system
- Harmful if swallowed
- Keep locked up and out of the reach of children
- In case of contact with eyes or skin, rinse immediately with plenty of water (at least 15 minutes) and seek medical advice immediately
- Remove contaminated clothing
- Wear suitable gloves and eye/face protection
- In case of accident or if you feel unwell, seek medical advice immediately (show label where possible).
|
|
|
|
Customer Reviews
|
Write a review
|
13 of 15 people found the following review helpful:
|
Great
|
|
Good Tests Kit
by DAVID NETTLES
|
|
Experience Level: Intermediate
|
|
Posted on 11/15/2007 from ORANGE PARK, FL UNITED STATES
|
|
|
Comments: This test kit works for me. I have the salifert kit also but you have to understand that Salifert and API measure two different things. API measures total nitrate, Salifert measures nitrate-nitrogen. To adjust you divide API by 4.4 or multiply Salifert by 4.4. Doing this has always yielded equivalent readings between the two kits.
Yes, I would recommend this product to my friends.
|
1 of 1 people found the following review helpful:
|
Excellent!
|
|
API Nitrate Test Kit
by Mike
|
|
Experience Level: Expert
|
|
Posted on 6/19/2008 from SAN FRANCISCO, CA UNITED STATE
|
|
|
Comments: I give this test a high score, not because it's the most accurate test out there, but because for the price it does what it needs to. API makes very inexpensive test kits, and might not be the most accurate ones out there, but if you don't need to know what your nitrates down to the 0.1 then this is the perfect kit for you. If you simply need a way to see if you have a problem at all this kit is for you.
Yes there are people who need to know if they have 0.5ppm of nitrates and that's fine, they can buy the other more expensive kits. However all I really care about is first, do I have a big nitrate problem? Then I want to know roughly how many. When I test mine I see a yellowish color (zero), then I'm happy.
2 regent formula, shake between mixing, and wait 5 minutes, it can't be any more simple
Yes, I would recommend this product to my friends.
|
|
|
|
Similar Items
|
|
|
|
Product:
|
|
List Price:
|
|
Our Price:
|
|
|
|
Rating:
|
|
Item Code:
|
|
Description:
|
|
|
|
|
|