Overview
Highly-concentrated and stable iron solution for supplementing aquaria containing hermatypic organisms (i.e. “photosynthetic” or zooxanthellate corals, clams, and their allies), macroalgae, coralline algae, mangroves, marsh grasses, and other desirablemarine algae and plants.
Particularly suited to systems outfitted with a refugium or mud system.
Stronger than most competing products.
Composed of purified water and ultra-high purity materials.
Formulated by a marine scientist.
Technical Background
Photosynthesis is carried out within cell bodies known as Chloroplasts. Iron is utilized in the electron transport chain within the chloroplasts, and is therefore required by photosynthetic organisms for continued functioning and health. In marine aquaria, these organisms include macroalgae (such as Caulerpa, Halimeda, and Penicillus spp.), marsh grasses and mangroves, encrusting calcareous algae, and the symbiotic zooxanthellae and zoochlorellae that reside within the tissues of hermatypic corals, clams, and their allies, as well as in some sponges. In effect, the availability of iron becomes a limiting factor in the rate of photosynthesis, and hence the rate of nutrient uptake and growth, for these organisms. While each aquarium will require different concentrations of iron, a good place to begin is within a range of 0.05 - 0.10 ppm; this will generally provide sufficient iron for the photosynthetic organisms present in the system. Some aquaria may require, or benefit from, iron concentrations greater than 0.10 ppm, however greatly exceeding this level is not recommended. The best method of determining the optimal iron concentration for an aquarium is to begin at 0.05 ppm and then gradually (i.e. over a period of weeks) increase the concentration as warranted by the appearance of the aquarium. Phosphate is a substance that encourages growth of algae under the environmental conditions commonly found in marine aquaria, and overdosing iron in the presence of excessive phosphate may result in algal proliferation; for this reason, the concentration of phosphate in a marine aquarium should be maintained as close to immeasurable as possible.
The rate at which iron is extracted from the water is determined by the stocking density of photosynthetic organisms, type of lighting, and other conditions. Once the rate of iron uptake in the aquarium has been determined, the proper dosing rate of this product can be easily calculated.
Instructions and Guidelines
Basic: Shake product well before using. Add 5 ml (1 capful) of product per 50 US-gallons of aquarium water every other day or as needed to maintain the iron concentration within a range of 0.05 - 0.10 ppm. When used in this fashion, 250 ml treats up to 2,500 US-gallons (9,464 L).
Advanced: Determine the iron concentration in the aquarium using an accurate test kit before supplementing. Shake this product well before using. Each ml of Ferrion will increase the concentration of iron (“[Fe3+]”) in 1 US-gallon (3.785 L) of water by 1 ppm. It is advisable to ensure that the concentration of phosphate not exceed 0.05 ppm in the aquarium to be dosed with an iron supplement; see opposite sidebar for additional information. If the initial [Fe3+] in the aquarium is below 0.10 ppm, add this product at the maximum rate of 10 ml per 20 US-gallons daily until the desired concentration is attained, then dose daily or weekly as needed (see below). Always attempt to maintain the [Fe3+] within a range of +/-0.02 ppm. To determine the dosing rate of this product once the desired [Fe3+] has been acquired, measure the daily rate of iron uptake (i.e. the decrease in iron) in your aquarium by measuring the aquarium`s [Fe3+] at the same time each day over a one- to two-week period. To determine the daily dosing rate (preferable to weekly dosing) for iron maintenance: estimate the volume of water in the entire aquarium system; multiply this number by the volume of water in the system to get the daily dosage required (ml) to maintain a stable [Fe3+]. Daily dosing maintains a more stable [Fe3+] (and more natural environment) than dosing weekly, in which the [Fe3+] spikes just after dosing and then gradually decreases throughout the course of the week.
Caution: Keep out of reach of children. Not for human consumption.
Guaranteed Analysis
0-0-0
Iron (Fe) (min) 0.40% Chelated Iron (118 mg/oz.; 4,000 ppm)
Ingredients
Purified water, Sodium feredetate
|
|
|
|
Customer Reviews
|
Write a review
|
0 of 0 people found the following review helpful:
|
Great
|
|
good stuff
by CHARLES GOODMAN
|
|
Experience Level: Intermediate
|
|
Posted on 7/6/2009 from NORTHRIDGE, CA UNITED STATES
|
|
|
Comments: An often overlooked ingredient for many of your reef tank organism.
I have only been using this brand a short time, so the jury is still out, but so far so good!
In general, Brightwell makes some of the highest quality stuff around!
Yes, I would recommend this product to my friends.
|
|
|
|
Similar Items
|
|
|
|
Product:
|
|
List Price:
|
|
Our Price:
|
|
|
|
Rating:
|
|
Item Code:
|
|
Description:
|
|
|
|
Ecosystem Aquarium Eco Magnesium
|
|
N/A
|
|
$6.99 to $10.99
|
|
|
Write a review
|
|
|
|
EcoSystem Aquarium® Technical Specifications ECO Magnesium Liquid Description: Adds essential magnesium for all reef inhabitants. Type: Marine Supplement Main Points:
Adds magnesium
|
|
|
|
|
Warner Marine Research ReefPure Balanced Ion Magnesium
|
|
N/A
|
|
$2.99 to $7.99
|
|
|
|
|
|
|
Warner Marine Research Balanced-Ion Magnesium Supplement Magnesium is the third most abundant ion in saltwater, behind only Sodium and Chloride. It is essential to the calcification process, utilized
|
|
|
|
|
|