This item is in stock in our East and West Coast warehouses
CAD Lights NR-1 Nano Media Reactor
A MEDIA REACTOR DESIGNED FOR YOUR NANO REEF. WORKS GREAT WITH BIO-PELLETS, GFO or CARBON
Newly designed is CAD Light Aquariums` innovative Bio-reactor specifically for Nano Reefs. Can be hung inside your aquarium/sump, or be installed fully submersed. Super small footprint at only 2.5" in diameter, this little reactor packs a good punch in effectively controlling and removing your Nitrates, Phosphates, slime algaes and other nuisance algaes. Can hold a strong dose of Bio-pellets of up to 150ML giving you an aquarium capacity of 50G each unit (depending on your Bio-load respectively) and can easily expand to multiple units using a variety of media (such as GFO or activated carbon) for larger systems. A fine filter media bag is recommended for GFO or activated carbon use. Yet, it can still fit into an aquarium as small as 4G, 8G, 18G and I50G systems.
AquaMaxx BioMaxx Plus BioPellets Filter Media - 8fl oz
AquaMaxx BioMaxx Plus BioPellets improve water quality for fish and other marine life in saltwater aquariums. BioMaxx Plus BioPellets initiate a more efficient denitrification process that removes nitrate and phosphate from aquarium water. High nitrate and phosphate fuels algae growth and may negatively impact invertebrate or coral.
Using BioMaxx Plus BioPellets inside a fluidized filter (media reactor) will help to achieve maximum results and efficiency. Use 0.5 to 1 liter of pellets for every 125 gallons of water. Starting with a low dosage and increasing over time is preferable to beginning with a higher dosage. Be sure to rinse the media before use.
1. Fill your fluidized media reactor with the appropriate amount of AquaMaxx BioMaxx Plus BioPellets.
2. Use a ball valve (or similar device) to adjust the flow inside the reactor so that the BioPellets are suspended within the reactor chamber. The pellets should not be pushed to the top.
3. Check your media reactor once each day to ensure your BioPellets are still fluidized. The pellets will slough layers and decrease in size due to the tumbling action inside the reactor. Replenish your reactor every 3 to 6 months (or as needed) with additional BioPellets.
Accessories for Buy a CAD Lights NR-1 Nano Media Reactor and get AquaMaxx BioMaxx Plus BioPellets - 8fl oz FREE