1-800-566-3474

1-1/2 Inch EZ-Flow PVC Pipe Tubing/ ft

Read 20 Reviews Write a Review

In Stock: Buy now and your order will ship the next business day

This item is in stock in our East and West Coast warehouses

$3.49  


FT1387

SHIPS FREE!

EZ-Flow PVC is 40% more flexible than standard flex pipe. Flexible PVC can simplify your plumbing as it allows you to bend and curve around pumps, filters and other obstructions. It retains its large inside diameter and helps to avoid the need of elbows so that water flow is not impeded. This will increase efficiency and reduce the amount the fittings required to help you get the most out of your pump. It is also resistant to both UV and ozone. Flexible PVC can be glued into standard PVC fittings using standard PVC glue. Not suitable for use with hose-barb or insert fittings.

Stylistic Specifications:

  • Made in the USA
  • ISO 9001 Certified
  • Color: Black
  • Sizes ½" – 2" up to 50ft. lengths
Operational Specifications
  • Outside Diameter Tolerance: +/- .006"
  • Temperature Range: -10F to 125F
  • True Schedule 40 rigid PVC Spiral Resists Crushing and Impact
  • FDA Non-Toxic Formulation
Please Note: Modify the cart quantity to increase the length of your tubing. Lengths greater than 50ft will come in two sections. Tubes are cut to size on a per-order basis and therefore cannot be returned or exchanged. We apologize for any inconvenience.

20 Reviews

JOE SKRIVAN from DRAPER, UT UNITED STATES

10/05/2015

Experience Level: Intermediate

QUIET!

I'm running a reeflo hammerhead pump in a closed cabinet but the plumbing from the pump is visible. My rigid pipe installation looked great, but the noise was unbearable. I spent a 1/2 day last week re-plumbing it all with this flexible PVC and it knocked out a lot of the noise. I did use rigid 45's in the corners because of the tight radius I'd need to bend but im sure it has no added noise form them. The stuff comes bent, so what I did was to cut it close to finished length and let a heat gun blow thru it (with one end blocked) for a few minutes. I had straight sections in about 15 minutes. It worked out great.

1 out of 1 found this review helpful

Was this review helpful?

RAFAEL VILLICANA from BEAUMONT, CA UNITED STATES

08/23/2015

Experience Level: Intermediate

Ultra-Flex PVC Pipe Tubing

This Ultra-Flex PVC Pipe Tubing is awesome to work with it does what it says it does. It's prefect you'll be satisfy..

1 out of 1 found this review helpful

Was this review helpful?

MATT MCCULLOUGH from DONALDS, SC UNITED STATES

04/25/2015

Experience Level: Intermediate

3/4 ultra flex

great product for working around and underneath tank and sump plumbing

Was this review helpful?

Happyjackson from Lynnwood, WA UNITED STATES

10/18/2014

Experience Level: Intermediate

This is more flexible?

This tubing is likely bullet proof. Don't plan on bending it. This stuff is only slightly more pliable than rigid pipe. It wants to go back to it's coiled shape and won't have it any other way. I wanted about 5 feet so I could make a 1 1/4" jag from my overflow to the sump. It took two muffler clamps and a two by four to hold it in place. Finally getting it all set up I didn't like the noise the ribbing caused as the water flowed down the pipe. Wouldn't buy that again or recommend it to anyone.

2 out of 3 found this review helpful

Was this review helpful?

JEFFREY SCHOFIELD from DELTONA, FL UNITED STATES

06/08/2014

Experience Level: Intermediate

Great product

I bought a 50' roll of the 1" tube, sinking a large amount of money into this product, sight unseen. I was nervous. But it worked great. Very nice product. Schedule 40, 3/4" pipe slips inside perfectly with PVC glue making adapting to plumbing fixtures very cheap and easy. NO barb fittings. The outer diameter is 1" so you can also treat it like 1" PVC using all the appropriate fittings. It is very tough, impossible to crush or kink. I'm using it as a hose for large volume water changes (attached to an irrigation pump), and it performed perfectly. Water changes that used to take me over an hour now take about 15 minutes. What a thing of beauty.

1 out of 1 found this review helpful

Was this review helpful?

MIKE G from MOUNT SINAI, NY UNITED STATES

01/20/2014

Experience Level: Intermediate

Super flexible!

Just installed this on my return. It's as flexible as regular vinyl, but without the kinking. Glued in super easy, and looks clean.

Was this review helpful?

Jordan from Baton Rouge, LA UNITED STATES

10/09/2013

Experience Level: Intermediate

Awesome

Used it for the return and overflow lines on a new system. Will never use standard PVC or vinyl tubing again. Standard PVC glue sealed perfectly. Note that it does not work like vinyl tubing and can't be clamped down to form a seal.

3 out of 3 found this review helpful

Was this review helpful?

JOYCE KUECKS from BUTTE, MT UNITED STATES

07/11/2013

Experience Level: Intermediate

Good product

Order came quickly and worked well with PVC gluing fittings just like regular PVC pipe. Was very pleased with flexibility of product. I would recommend this to anyone.

2 out of 2 found this review helpful

Was this review helpful?

CARL SCHEITRUM from MACUNGIE, PA UNITED STATES

06/11/2013

Experience Level: Intermediate

Great for the job

This flexible tubing was exactly what I needed. I needed to make several bends in a small area, including around other rigid pipes. This worked perfectly.

Was this review helpful?

ROBIN ASHBY from STAFFORD, VA UNITED STATES

06/10/2013

Experience Level: Intermediate

Not so flexible

This review relates to 1-1/2 inch ultra flex. I bought this to make short (12 to 18 inch) flexible unions between two tanks sitting side by side that are being used as sumps. I needed to connect the bulkhead fittings with something flexible. I didn't find it to be very flexible. Since it maintains a slight curve no matter how short of a piece you use I was worried that the 1/4 inch glass wouldn't be able to handle the strain of even a slight bend. The local Lowes hardware store sells "regular" flexible PVC and it seems to be about the same as the ultra-flex in regards to flexibility. Smaller diameters might be more flexible, this is pretty big stuff. I ended up using a couple of rubber "no hub" couplings to make my unions.

4 out of 5 found this review helpful

Was this review helpful?