Great Aquariums Start Here
1-800-566-3474
    Free Shipping On $175+
  • FREE Shipping On $175+
  • 14-Day Low Price Guarantee
  • 14-Day Low Price Guarantee
  • Same Day Shipping
  • Same Day Shipping
FREE Shipping on Orders Over $175
FREE Shipping on
Orders Over $175
Standard ground shipping (1-7 business days) starts at a low $5.99 and most orders over $175 ship FREE. Learn More
14-Day Low Price Guarantee
If you find a product we sell for a lower price at another online store, we will match their price—today and up to 14 days after you've purchased the item! Learn More
Same Day Shipping
Same Day Shipping
We promise to ship your order as fast as humanly possible. In fact, 99% of orders placed before 6 pm EST ship the same day! Learn More
Home » Saltwater Aquarium Supplies  » Reverse Osmosis  » John Guest RO/DI Parts  »  JG 1/4 inch x 1/4 inch Bulkhead - Grey
JG 1/4 inch x 1/4 inch Bulkhead - Grey

JG 1/4 inch x 1/4 inch Bulkhead - Grey

In Stock: Buy now and your order will ship the next business day
Item #:
RO5411
Quantity:
MSRP: $5.99
You Save: $1.00 (16%)
Marine Depot 60-day Returns
At Marine Depot, we stand behind our products. That is why we offer a 60-day return period: one of the best in the industry! Learn More

JG 1/4 inch x 1/4 inch Bulkhead - Grey Information




Color: Gray
John Guest Part# : PI1208S
Tube O.D.: 1/4"
Tube O.D.: 1/4"

How to make a connection
  1. Cut tube square.
    It is essential that the outside diameter be free of score marks and that burrs and sharp edges be removed before inserting into fitting. For soft or thin walled plastic tubing we recommend the use of a tube insert.
  2. Insert tube.
    Fitting grips before it seals. Ensure tube is pushed in to the tube stop.
  3. Push up to tube stop.
    Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the "O" ring provides a permanent leak proof seal.
  4. Pull to check secure.
    Pull on the tube to check it is secure. It is good practice to test the system prior to leaving site and/or before use.
Disconnecting:
Push in Collet and remove tube.
To disconnect, ensure the system is depressurized before removing fitting. Push in collet squarely against face of fitting. With the Collet held in this position, the tube can be removed. The fitting can then be re-used.




Manufacturer Info

John Guest
In 1961 John Guest`s vision was to run a company with innovation, quality and sustainable growth to be at the core of the organization’s principles.

In 1974, John Guest developed his first push in tube connector for use with compressed air. That basic "Super Speedfit" concept has been developed to include fittings for a wide range of applications.

John Guest`s World Headquarters are located in the UK where all their fittings are designed, manufactured and distributed throughout the world.

JG 1/4 inch x 1/4 inch Bulkhead - Grey Reviews



Average Rating
(8 reviews)
Sort Reviews By:


JG 1/4 inch x 1/4 inch Bulkhea

by
Reviewers Rating Excellent!


Posted: 6/29/2013 from Houston, TX UNITED STATES
5.0 5
Experience Level: Intermediate


Comments: These John Guest bulkheads are some of the best and easiest to use. They are easy to install and don't seem to leak at all. I've installed a few in my RO and top off system and haven't had a problem. I would recommend this product.


Did you find this review helpful? Yes No




Not for submerged use

by
Reviewers Rating Excellent!


Posted: 8/22/2011 from Chestnut Ridge, NY
4.5 5
Experience Level: Intermediate


Comments: For its intended use, I'm sure this part is great. How could JG not be?However, it is NOT intended for the use that it appears most people are trying to use it for.I came by the website to look for something like this for an auto-topoff system. Doing a little more research elsewhere, I found John Guest's catalog, which specifically states that this bulkhead is not for submerged use. So, it's not designed to be at the bottom of a trashcan-reservoir for ATO purposes.


2 of 2 People found this review helpful, did you? Yes No




Not for submerged use

by
Reviewers Rating Excellent!


Posted: 8/22/2011
5.0 5
Experience Level: Intermediate


Comments: For its intended use, I'm sure this part is great. How could JG not be?However, it is NOT intended for the use that it appears most people are trying to use it for.I came by the website to look for something like this for an auto-topoff system. Doing a little more research elsewhere, I found John Guest's catalog, which specifically states that this bulkhead is not for submerged use. So, it's not designed to be at the bottom of a trashcan-reservoir for ATO purposes.


Did you find this review helpful? Yes No




Not for submerged use

by
Reviewers Rating Excellent!


Posted: 8/22/2011
5.0 5
Experience Level: Intermediate


Comments: For its intended use, I'm sure this part is great. How could JG not be?However, it is NOT intended for the use that it appears most people are trying to use it for.I came by the website to look for something like this for an auto-topoff system. Doing a little more research elsewhere, I found John Guest's catalog, which specifically states that this bulkhead is not for submerged use. So, it's not designed to be at the bottom of a trashcan-reservoir for ATO purposes.


Did you find this review helpful? Yes No




Not for submerged use

by
Reviewers Rating Excellent!


Posted: 8/22/2011
5.0 5
Experience Level: Intermediate


Comments: For its intended use, I'm sure this part is great. How could JG not be?However, it is NOT intended for the use that it appears most people are trying to use it for.I came by the website to look for something like this for an auto-topoff system. Doing a little more research elsewhere, I found John Guest's catalog, which specifically states that this bulkhead is not for submerged use. So, it's not designed to be at the bottom of a trashcan-reservoir for ATO purposes.


Did you find this review helpful? Yes No




Good Stuff

by
Reviewers Rating Great


Posted: 3/14/2009 from KENNER, LA UNITED STATES
4.0 5
Experience Level: Beginner


Comments: Good well thought out product. The only thing I found missing is a o-ring seal.


1 of 1 People found this review helpful, did you? Yes No




auto top off

by
Reviewers Rating Great


Posted: 2/21/2009 from BARBOURVILLE, KY UNITED STATES
4.0 5
Experience Level: Intermediate


Comments: I drilled a 5/8 in. hole in the side of a 5 gallon bucket near the bottom and installed this in it,connected(with 1/4in. tubing like is used for RO/DI filters)to a Kent float valve in my sump for auto top off,I set the bucket on a table next to my sump for gravity flow,it works great. I did add 1.5 to 2 gallons a day,now I just fill the bucket every other day. My water level in my sump hasn't changed since I did this. I would have gave it a 5 star rating if it had came with a rubber gasket.


Did you find this review helpful? Yes No




1/4 bulkhead

by
Reviewers Rating Great


Posted: 10/10/2007 from COLUMBIA, TN UNITED STATES
4.0 5
Experience Level: Expert


Comments: the part was fine just surprised it did not come with o rings or washers


3 of 4 People found this review helpful, did you? Yes No


JG 1/4 inch x 1/4 inch Bulkhead - Grey Window Navigation Prev Next Zoom Close
We value your opinion & experience
Thank you for taking the time to review our products!

This is a Product Review for: JG 1/4 inch x 1/4 inch Bulkhead - Grey

First tell us about yourself.

Name to display on the review: Location (ex: Anaheim, CA):
Your experience level:


How would you rate this product?

Review Title:


Write your review:
(Please focus on product quality and performance, maximum 2000 characters)

This item is temporarily unavailable but will be back in stock soon.

Item #
Price:
Click the Add To Cart button below if you'd like to reserve this item today. Any other items included in your order will be immediately processed and shipped. We will ship this item separately as soon as it arrives. We will not charge you for this item until it ships and you will incur no additional shipping charges.

Enter your email address in the field below and click the Notify Me button if you'd like us to send you an email when this item becomes available. Although you will be immediately notified when we have stock on hand, we will not reserve any units for you; you must return to our website and place an order.

Your Email:
Just enter your email address below and we'll let you know when the product you are looking for becomes available!

Item Code:
Price:
Your Email:
If you find a product we sell for a lower price at another online store, we will match their price—today and up to 14 days after you’ve purchased the item!

Enter the price, shipping cost and website address where you found the lower price. Then click the "Add to Cart" button. We will review the lower price while processing your order and make any necessary reductions before your order ships. Some restrictions apply. See Terms & Conditions.

Price *
Shipping Cost *
Competitor's Website *

Add to Wish List
Select Wish List:
Comments (up to 200 characters):
Quantity Desired:
Quantity Received:
Priority:
Email Specials
Subscribe to our newsletter feed.
Newsletter Tips & Tricks! New Products!
Discounts & Promos!
Testimonials
Sept 12, 2014
"Great store with all the right supplies for the Reefer."
TCshore

Sept 12, 2014
"Very satisfied with all my purchases from Marine Depot. The ease of ordering to the prompt and quick delivery of merchandise, I am very pleased. Thank You!"
Phil

Sept 12, 2014
"Great site...I order most of my reef supplies from here. And they always have everything in stock."
Smitty

Marine Depot Newsletter Signup
Aquariums, News & Culture
Join 100,000+ readers who receive weekly tips, videos, deals and giveaways.