1-800-566-3474

JG 1/4 inch x 1/4 inch NPTF Male Elbow - White

Read 1 Reviews Write a Review

Temporarily Out of Stock: ETA 2-3 business days

$3.99  


RO5173

SHIPS FREE!

John Guest

Color: White
John Guest Part# : CI480822W
Tube O.D.: 1/4"
Thread NPTF: 1/4"

How to make a connection

  • Cut tube square
    It is essential that the outside diameter be free of score marks and that burrs and sharp edges be removed before inserting into fitting. For soft or thin walled plastic tubing we recommend the use of a tube insert.
  • Insert tube
    Fitting grips before it seals. Ensure tube is pushed in to the tube stop.
  • Push up to tube stop
    Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the "O" ring provides a permanent leak proof seal.
  • Pull to check secure
    Pull on the tube to check it is secure. It is good practice to test the system prior to leaving site and/or before use.
Disconnecting
Push in Collet and remove tube

To disconnect, ensure the system is depressurized before removing fitting. Push in collet squarely against face of fitting. With the Collet held in this position, the tube can be removed. The fitting can then be re-used.


Manufacturer Info

John Guest
In 1961 John Guest`s vision was to run a company with innovation, quality and sustainable growth to be at the core of the organization’s principles.

In 1974, John Guest developed his first push in tube connector for use with compressed air. That basic "Super Speedfit" concept has been developed to include fittings for a wide range of applications.

John Guest`s World Headquarters are located in the UK where all their fittings are designed, manufactured and distributed throughout the world.

Mike from SAN GABRIEL, CA UNITED STATES

04/08/2010

Experience Level: Beginner

it works.

I purchased a ro/di from M.D. and I couldnt figure out how to remove the tubing to put the membrane in the di portion. So i messed up the elbow in the process. i called and M.D. sent one right out to me, but it was the wrong size. They sent the correct one right afterwards so it was all good. By the way, you just press on the plastic ring around the hole where the tube goes and just pull out the tubing. The directions for the ro/di are poorly written. Thanks M.D. for sending it out. The elbow serves its purpose, fyi.

Was this review helpful?

Accessories for JG 1/4 inch x 1/4 inch NPTF Male Elbow - White


Similar Items