NP Biopellets All In One Biopellets

Read 8 Reviews Write a Review

From $22.99

Please make a selection

NP Biopellets

Previously, Reef Interests was the first to develop and present the NP reducing BioPellets which are mostly removing Nitrogen waste products and along with a smaller amount of Phosphates. DVH has been hard at work developing a new and better product called All-In-One BioPellets.

After 4 years of development and research DVH is very pleased to be able to present the Reef Interests All-In-One Biopellets (Patent Pending), which can be used to more efficiently remove both Nitrogen (5x) as well as Phosphates (10x-20x) without the need of using separate phosphate removing substrates. Now for the 1st time there is no need to have to purchase expensive GFO media for PO4 reduction and Biopellets for Nitrate reduction. With this All-In-One simple to use product, Reef Interests All-In-One BioPellets will do it all at an affordable cost with no need for 2 seperate reactors for GFO and Biopellets.

The positive effects of NP-reducing BioPellets on water quality are based on the principle of immobilization. Waste products from the water, mainly nitrate and phosphate, are converted into bacteria. This process keeps the aquarium water clean. The new formula All-In-One Biopellets are composed of highly purified compounds, to ensure the safe use of Reef Interests products in marine tanks occupied by sensitive and precious animals such as corals, invertebrates, fish etc…

The pellets will allow aerobic growth of bacteria which consequently will consume nitrate and phosphate simultaneously. The bacteria will use up the carbon from the Reef Interests All-In-One BioPellets whilst nitrogen and phosphorus are taken from the water as nitrate and (ortho)phosphate. This conversion of organic BioPellets (together with inorganic nitrogen and phosphorus) into microbial biomass is called immobilization. In contrast to our “old” Biopellets, we have observed that the All-In-One Biopellets work best with very high water flow.

How to Use:

Reef Interests reccomends soaking All-In-One Biopellets for a period of 24 hours in marine aquarium water before use in your aquarium reactor. This will insure more uniform tumbling once added to the reacotor. All-In-One BioPellets is heavier than NP BioPellets and it requires a higher flow rate to tumble the media. For example, a 700 liter tank (185 gallons) with a fluidized filter containing 2 liter of All-In-One Biopellets will require a minimal flow through of 2000-3000 l/h (528-792 GPH).

Results after 10 months: The bioload on a 700 liter aquarium (185 gallons) contains approximately 50 fish and after 10 months of testing both nitrates and phosphates were undetectable with standard nitrate and phosphate aquarium test kits with the use of 2 liters of media.

The surplus of bacteria will be consumed by filter and suspension feeding organisms, such as sponges and corals, or skimmed off by a protein skimmer. In addition, with a high feeding regime, Reef Interests advises to use a simple filter sponge on the outlet of your fluidized filter to remove excess of bacteria which will otherwise cloud your water slightly.

On average the All-In-One Biopellets takes 1-4 weeks to give rise to sufficient bacteria to allow nitrate and phosphate levels to drop. Importantly, allow your aquarium inhabitants to adjust to their new environment by slowly increasing the level of BioPellets over a period of several weeks. Add extra pellets every 3-6 months dependent on Biopellet consumption and levels of NO3 and PO4.

500-1000mL of biopellets is recommended per 100 gallons.



Experience Level: Expert

Works Good-But....

I have been a reefer for nearly 45 years now and have seen it all. Next to using a high quality salt water mix, de-ionized water, and not overfeeding, adding a bio pellet reactor to a marine aquarium maybe the next best step in maintaining good water quality. Bio Pellets have reduced my tanks nitrates to ZERO, and my phosphates a barely readable. The good news about NP All-in One-Bio Pellets is that they good a great job in reducing nitrates and phosphates. The bad news is that the orange sludge that comes with the NP product is intolerable! My sump and filter bags are completely immersed in the orange slime which is nearly impossible to get rid of. Also, my Tunze protein skimmer needs to be completely disassembled and cleaned every other week to function. The NP instructions state to add the media into a reactor slowly over many weeks to allow tank inhabitants to adjust, which I did! In short, I am going back to Warner Marine ecoBAK Plus Bio Pellet Filter Media which I had great results with. With Warner ecoBAK Plus there was NO ORANGE SLIME and it still removed the nitrates to zero, and phosphates to a very low reading, as they should be!

Was this review helpful?



Experience Level: Intermediate

Up to the mark but dusty

The reason for opting Bio Pellets was to reduce NO3 and PO4 which is quite promisingly achieved in just two weeks. But the issue of small sediments coming from the pellets due to tumbling is irritating. I used filter socks on the reactor output after sediments was all over the tank. White filter socks is blackish purple in just two days and have to clean more often.I have turned down the tumbling to absolute minimum.So 3.5.

1 out of 1 found this review helpful

Was this review helpful?

Morse from Arroyo Grande, CA UNITED STATE


Experience Level: Intermediate

Cost effective

These in my little skimz bp reactor. Do not seem too heavy. Mixed with some regular bpellets. Seem to fluidize the same watching them.

1 out of 1 found this review helpful

Was this review helpful?



Experience Level: Intermediate

no title

building up a lot of white stuffs inside my pumps and clogging up many places where there is a high water pressure. I have used it about over a year.

Was this review helpful?



Experience Level: Intermediate

They Work!

Be careful not to add too many all at once. Also, I recommend a nice strong biopellet reactor since these are heavier and require more power to tumble property aka no clumping

1 out of 1 found this review helpful

Was this review helpful?



Experience Level: Intermediate

For Some Systems

I have tried All In One Biopellets, using fluidized reactors, in two systems; one a lightly stocked 90 gallon mixed reef, the other a moderately stocked 300 gallon FOWLR. In the reef system, they work perfectly. Nitrate and phosphate nearly non-detect. FOWLR a failure. Overwhelmed quickly with nutrients; clumping, production of orange slime and black dust. For reefers only.

2 out of 2 found this review helpful

Was this review helpful?



Experience Level: Expert

The best pellets bar none

I tried both the Vertex and ReefDynamics pellets and had issues with SPS corals losing polyp extension and with poor Phoshate removal. I have had success with both the regular NP biopellets and the all-in-one biopellets. The use of a recirculating reactor is a must in my opinion to be able to tumble the pellets properly while separately controlling the flow through rate.. You will use a little more pellets with the all in one as they degrade faster than standard pellets but you will not need any other phosphate removers like GFO

2 out of 2 found this review helpful

Was this review helpful?



Experience Level: Expert

% stars based on their promise

Placed all 1000ml in my reef octopus bio churn 120r today. I was running np bio pellets before switching to these all in ones. Todays numbers tested with a red sea pro kit (Nitrates 0, Phosphates .2) We will see if the nitrates stay at 0 and if the phosphates drop. I'll give it a couple of weeks and then report back.

16 out of 27 found this review helpful

Was this review helpful?