Main Features
|
The model series of the Comline DOC skimmers has been developed for an effective and modern protein skimming process in marine biotopes from 200 to 2,000 liters (52 to 528 gal.). They stand out for their compact dimensions at the same time ensuring a high foam cup capacity, and producing a very high throughput on account of their air capacity of 650 or 1,00 l/h (171 or 343 gal./h), for example, depending on the model. They can be placed directly in the aquarium or in cabinet systems with a variable water level.
At an immersion depot of 240 to 290 mm (9.4 to 11.4 inches), the Comline DOC skimmer models can be placed easily and discreetly in the aquarium directly. The inlet of fresh water can be set at between 5 percent and 70 percent. They can also be used in sumps with variable levels from 100 to 280 mm (3.9 to 11 inches). The accessories supplied have to be used to ensure the generation of a constant internal water level. The water circuit is totally open and operates at a fresh-water inlet of 100 percent; depending on model, a water throughput of 1,200 l/h or 2,400 l/h (317 gal./h or 634 gal./h) is achieved, distinctly improving the gas exchange in the aquarium.
In case of operation in sumps, the cartridge core on the outlet pipe ensures bubble-free outgoing water. Skimmer cup and foam reactor are one unit in all TUNZE DOC skimmers. Every cleaning of the skimmer cup leads to the reactor being cleaned at the same time, and thus a very constant and efficient foam production is ensured. During the cleaning process, the Hydrofoamer remains operational and automatically flushes the jet and the air passage.
Specifications:
- Recommended for marine aquariums up to 500 liters (132 gallons)
- Dimensions: 4.9"L x 4.4"W x 14.8"H
- Water throughput: 1,000 l/h (264 gal./h)
- Air capacity: 500 l/h (132gal./h)
- Collection cup volume: 0.4 l (0.10 gal.)
- In-sump (9005.400 required) or in-tank use
- Power Consumption: 12W
How do you select the right DOC skimmer for your aquarium?
The Comline DOC skimmer with hydrofoamer has an open water circuit with can be controlled. Apart from the air output, the flow rate of the skimmer determines the output of the DOC skimmer. In addition, due to its biotope composition, every marine aquarium has a different sensitivity with respect to the organic load. Based on a standard marine aquarium with soft corals, the data on the suitable skimmer size may differ in other biotopes. For this reason, the aquarium volumes recommended for the skimmer should be reduced in case of sensitive biotopes.
Low Sensitivity
In soft coral aquariums with long-polyp corals and anemones, for example, the share in dissolved organic matter may be higher, sometimes it may even be vital. In this type of aquarium, the recommended aquarium volume can be used without deduction.
Medium Sensitivity
A medium organic stability is usually found in mixed aquariums inhabited with soft and stony corals (LPS) and (SPS). Filter-feeding animals, sponges, et cetera, are found there frequently as well. For these aquariums, a reduction of about 20 percent of the skimming capacity is calculated. A skimmer for 1,000 liters (264 gal.) should thus be used for an aquarium of about 800 liters (221 gal.) which has this kind of reef design
High Sensitivity
Aquariums with primarily small-polyp stony corals (SPS) require an especially high degree of purity. They should have no load of phosphates or nitrates worth mentioning. Good oxygen saturation and very clear water are the prerequisites. Comline ODC skimmer is also often used as a “stand-alone” solution in these aquariums. This type of aquarium should be reduced by about 40 percent in volume for the skimmer volume mentioned.
High Sensitivity and High Load
Hard coral aquariums with a high population of fish require an extremely high skimming capacity. The skimmer has to ensure the degree of purity for the hard corals at an above-average high fish load. If the Comline DOC skimmer has to be operated as a “stand-alone” solution in these aquariums, a high-performance is required. This type of aquarium should be reduced by about 60 percent in volume for the skimmer volume mentioned.
NOTE: Most Marine Depot products are sold in 110V conversions. Please verify your country’s volt conversion before making any electrical purchase.
|
|
|
|
|
|
Customer Reviews
|
Write a review
|
11 of 11 people found the following review helpful:
|
Great
|
|
Tunze 9015
by
Jeff M.
|
|
Experience Level: Intermediate
|
|
Posted on 8/27/2007 from CHICAGO, IL UNITED STATES
|
|
|
Comments:
After a nine day break in the skimmer started to produce a thick white foam with more production everyday. I've had other skimmers, the Tunze seems to be the very simple to operate with only one air adjustment screw, which so far has not needed any adjustment. I would have trouble fitting any other skimmer with this rating in my sump because of size restrictions. The manual is a little vague in terms of putting the skimmer together. So far the skimmer seems to be the perfect skimmer.
Yes, I would recommend this product to my friends.
|
9 of 9 people found the following review helpful:
|
Excellent!
|
|
worth every penny!
by
joe
|
|
|
|
|
|
|
Comments:
no one seems to talk about these, BUT THEYRE AWESOME! replaced my existing skimmer to gain space in my sump in 3 days it pulled out some of the nastiest looking skimmate i ever seen!!
Yes, I would recommend this product to my friends.
|
|
Customer Reviews
|
|
|
|
Similar Items
|
|
|
|
Product:
|
|
List Price:
|
|
Our Price:
|
|
|
|
Rating:
|
|
Item Code:
|
|
Description:
|
|
|
|
|
|
Tunze Master DOC Protein Skimmer
|
|
N/A
|
|
$378.06 to $2005.40
|
|
|
|
|
|
|
TUNZE® DOC Skimmer 9410 Recommended for aquariums up to 1,000 litres (264 USgal.) of salt water. Immersion depth from 140 mm (5.5 in.) to 240 mm (9.4 in.), Dimensions without post-filter: L250 x
|
|
|
|
|
|