The unit is supplied with four connection cables 7092.30 and photo-electric cell 7094.050 permitting a near-nature current control with up to four Turbelle ® electronic. If two branch adapters 7092.34 are used, up to eight Turbelle® electronic can be connected which are operated in pairs.
Currents are an energy of life in your aquarium. Turbelle ® electronic circulation pumps are controlled electronically. TUNZE Aquarientechnik have developed a large range of control accessories to simulate the various current conditions in the sea.
(A) Wide-spread current - Turbelle ® pumps produce a wide-spread (soft) current.
(B) Wave simulation - The maximum and minimum output as well as the pulse time of the pumps can be set easily – separately for the two channels in Multicontroller 7094, and for one channel in Multicontroller 7091.
(C) Foodtimer (7091 + 7094) - The pumps can be switched off by the push of a button. Automatic restart after 8 to 10 minutes.
(D) Operation in night mode - The output of the pumps is reduced during the night. The photo-electric cell 7094.05 required is supplied along with Multicontroller 7094. The photo-electric cell has to be ordered separately for Singlecontroller 7091.
(E) Sequential pump circuit (7094 only) - The pumps are started one after the other, which produces a swelling current. The switching time can be adjusted.
(F) Tide simulation (7094 only) - The pumps are switched on or off alternately. The switching time can be adjusted between 1 minute and 12 hours.