Slip Bulkhead Strainers:
- ½” Slip Bulkhead Strainer
- ¾" Slip Bulkhead Strainer
- 1" Slip Bulkhead Strainer
- Thread Bulkhead Strainers:
- ¾” Thread Bulkhead Strainer
- ½” Thread Bulkhead Strainer
- 1” Thread Bulkhead Strainer
- 1½” Thread Bulkhead Strainer
- 2” Thread Bulkhead Strainer
Product Questions
The 3/4 strainer threaded strainer sticks out about 1 3/4" from the base of the threads. Another option if you are worried about clearance is the low profile strainer here:
https://www.bulkreefsupply.com/low-profile-bulkhead-overflow-strainers.html
If you have any other questions please let us know!
unfortunately we do not carry the 1.25" sized strainer currently. The 1" would be too small and simply fall into the elbow with out being secure. You can attempt to reduce the elbow with a bushing or other reducer to use 1" however.
The over flow strainers are a spigot or street fitting meaning they are the same outside diameter as a piece of pipe. To attach to a bulkhead it can be placed directly in the bulkhead, to attach to a piece of pipe you will need a slip x slip coupler. Feel free to let us know if you have any further questions!
If you don't have threads in your bulkhead then you would want a slip trainer. Also, keep in mind that the sizes listed are nominal plumbing sizes, so a 2" strainer is for a 2" bulkhead, intended for 2" pipe, etc, but not a literal measurement of 2". Just make sure to double check the nominal size of the actual plumbing and it will fit just fine.
Login and Registration Form