Tunze Turbelle Pump/Powerhead - Electronic Kit, Centrifugal Pump and Power Timer |
|
Turbelle® Electronic Pumps |
Turbelle ® Electronic 5001 Pump
Turbelle® electronic 5001 is the result of twenty years of experience of TUNZE® Aquarientechnik GmbH in the field of submerged centrifugal pumps with electronic motor. Basically this model is identical with Turbelle® powerhead, however it has been fitted with electronic speed control and operated on safety extra-low voltage. Turbelle® electronic 5001 is ideal for the simulation of lapping waves or tidal currents in every aquarium. It contains a new microprocessor-controlled motor and thus can be called an “intelligent pump”: The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. This energy consumption is about 30 per cent lower than in conventional pump motors. The pump will be stopped immediately in case of blockage. After the blockage has been removed, the pump will start up automatically after a delay of 20 seconds. The pump driver has been provided with a fish care function, which causes a revolution of the screw every twenty seconds when the pump is at a standstill. Turbelle® electronic 5001 with an electronic motor can be controlled by Multicontroller 7094 and 7095 as well as by Singlecontroller 7091. It comes with a cable of 5 m (16 ft.) in length and an electronic power supply unit. 100 – 240 V / 50 – 60 Hz. |
 |
Turbelle ® Electronic Pump
Turbelle® powerhead (submerged motor-driven pumps) are superior pumps leading with respect to power saving, operating on safety extra-low voltage.. They can be used as circulation and filtration pumps in versatile applications. The new generation has been developed for ideal ease in maintenance. The pump section does not contain any parts made of metal and no shaft made of break-prone ceramics. Naturally all properties are retained which have made Turbelle® electronic an outstanding aquarium pump. The driver and the power supply unit are enclosed to all Turbelle® electronic pumps.
Warranty: 2 years from date of purchase. |
 |
|
|
|
Turbelle ® Electronic Kit |
Turbelle ® electronic kits are assemblies of pumps with drivers and control units. The required overall current (filter flow and pump flow) in the aquarium should amount to eight to ten times the aquarium contents in saltwater aquariums, and to three to five times the aquarium contents in freshwater aquariums. The basic kits comes with a Singlecontroller 7091 for control.
Warranty: 2 years from date of purchase. |
 |
|
|
|
Turbelle® Classic Centrifugal Pumps |
Turbelle® centrifugal pumps have been developed especially for aquarium use. They combine the advantages of high performance and low power consumption with easy handling and reliable operation.
The pumps are run-dry safe, resistant to pressure filters, and can be connected to the Multicontroller and the Singlecontroller by means of pump adapter 7094.40.
Irrespective of their operation in fresh or salt water, they are almost maintenance-free for many years. They are electrically waterproof in compliance with German standard VDE 700/236.
The scope of delivery includes slotted pipe and flow deflector.
For the attachment to horizontal pane covers, we recommend the use of the mounting bracket (3) made of high-grade steel in combination with the mounting clamp supplied along with the pump.
Warranty: 2 years from date of purchase. |
 |
|
|
|
|
|
| Magnetic holder for all Turbelle pumps. The magnetic holder permits uncomplicated mounting of components at any position on the aquarium pane; encapsulated construction; requires seconds only for attachment; two models for glass thickness of up to 12mm (0.47") and up to 19mm (0.74"). |
 |
|
|
|
Turbelle Holder Extension |
 Holder Device Extension (3000.260)
Holding device extension, enables three other fastening variants:
- Holding device extension (A)
Extension of the perforated rail by 20 cm.
- Glass top attachment (B)
Used to attach the perforated rail below glass tops with a width of 4 to 15 cm.
- Adhesive attachment (C)
The clamp holding device is not required for this type of attachment. Instead, two threaded platelets have to be stuck to the aquarium pane with silicone adhesive 104.72 for the perforated rail.
- To be used for acrylic tanks and tanks with euro bracing.
Warranty: 2 years from date of purchase.
|
 Holder Device Extension M5x55mm (3000.244)
Enables other fastening variants for the following applications:
- Attachment for thicker panes (A)
Two long screws permit the attachment of the holding devices supplied, also on thicker panes up to 34 mm (1.33”).
- Attachment for Rims (B)
The extension can be used to attach the holding device for aquarium rims up to 34mm (1.33”) thickness. The rim can project outward about 10mm (0.4”).
- Supporting attachment for horizontal pane (C)
It allows attachment on horizontal aquarium panes for 4 to 8 cm (1,6” to 3,1”) with an adjustable support. Especially suitable for COMLINE units.
- To be used for Oceanic and All-glass tanks.
Warranty: 2 years from date of purchase. |
 |
|
Holder Extension - Turbelle® Pumps only. Does not work with Classic Pumps |
|
|