Neptune Systems Aquarium Controller & Monitor Probes & Accessories Information |
pH Probe
- pH precision is .01 units.
- Lab grade probe w/ 10' coax cable.
- Sealed Ag/AgCl reference.
- Standard BNC Connector.
|
 |
| Manufacturer Warranty: 90 days from date of purchase. Repair or replacement within 30 days or within the remainder of the original warranty, whichever period is longer. |
 |
ORP Probe
- ORP precision is 1 mV.
- Lab grade probe w/ 10' coax cable.
- Platinum band electrode.
- Standard BNC Connector.
|
 |
| Manufacturer Warranty: 90 days from date of purchase. Repair or replacement within 30 days or within the remainder of the original warranty, whichever period is longer. |
|
Temperature Probe
- Temperature precision is 0.1°F.
- High quality probe w/ 6' cable.
- Encapsulated thermistor.
- 2.5mm Phono Jack Connector.
|
 |
| Manufacturer Warranty: 90 days from date of purchase. Repair or replacement within 30 days or within the remainder of the original warranty, whichever period is longer. |
|
Conductivity Probe
- Dual Range
- 0 to 999 us/cm or
- 0 to 99.9 ms/cm
- Lab quality probe w/10' cable.
- Minidin 4 Connector
|
 |
| Manufacturer Warranty: 90 days from date of purchase. Repair or replacement within 30 days or within the remainder of the original warranty, whichever period is longer. |
|
Oxyguard Dissolved Oxygen Probe
- 0 to 19.9 ppm.
- Lab quality probe w/10' cable.
- Temperature, Altitude, and Salinity Compensation.
- Minidin 6 Connector.
|
 |
| Manufacturer Warranty: 90 days from date of purchase. Repair or replacement within 30 days or within the remainder of the original warranty, whichever period is longer. |
|
PC Serial Cable
In order to connect the AquaController to a PC, a serial connection is required. This serial cable is 6 foot long with a minidin 8 connector (plugs into the AquaController) on one end and a female DB9 connector on the other. If a longer serial connection is required, a 'straight through' serial externsion cable can be purchased from your local computer store. |
 |
Ground Isolated Serial Connector
The ground isolated serial connector (SERIPC9) is used to break ground loops between your PC and the AquaController. In some installations a ground loop is formed when a serial connection is made and can cause erroneous pH and ORP readings. This ground loop can be broken by installing a GISC in the series with the serial cable from the AquaController. If the serial cable is going to be permantly hooked up to the AquaController, then the GISC is recommended. The GISC measures 1.5" x 1.25" x .65" and has one male DB9 connector and one female DB9 connector. Note that the GISC is only for use with the AquaController or the AquaController 2. |
 |
|