Two Little Fishies Aquarium Filter Media (HydroCarbon and Phosban) |
 |
| Two Little Fishies HydroCarbon 2 G.A.C. (Granulated Activated Carbon) Filter Media |
 |
Granular activated carbon filter media designed specifically for water purification. Removes dissolved organic compounds that turn the water yellow. The extremely porous granules are the optimum size for use in high capacity filters, allowing high flow at minimal backpressure. Positively does not leach phosphates. Available in 1 Liter bottle and 4 Liter bucket. |
|
|
| Two Little Fishies PhosBan Filter Media |
 |
This granular ferric oxide hydroxide filter media absorbs phosphates from saltwater and freshwater. Also absorbs silicates and dissolved organics. Does not leach absorbed substances and does not affect water pH. Long lasting and easy way to control phosphate levels permanently. |
|
|
| Two Little Fishies PhosBan Reactor |
|
 |
The PhosBan Reactor 150 is designed with the upflow principle to achieve the most efficient use of Phosban or other chemical filter media. By pushing water from the bottom upward through a dispersion plate, it forces an even distribution of water through the media, and prevents channeling.
- 17.5" x 4.5" Footprint.
- Fills with 130 grams (250ml) to 200 grams (385 ml) of PhosBan.
- One reactor is designed for up to 150 gallons.
- Recommended flow rate: 80 gph = 300 lph for 130 grams PhosBan, 90 gph = 342 lph for 200 grams.
- Can be installed as hang-on, sump, above tank, etc.
- Use with any granular chemical media, including HydroCarbon 2 Activated carbon or ROWAphos.
- Tubing NOT included; 1/2" ID flexible tubing required
|
|
|
| Kent Marine Phos Reactor |
|
 |
The Kent Marine Phos Reactor is primarily intended to be used with phosphate-removal media such as Kent Power Phos and Phosphate Sponge, however it may be used with numerous filtration media to best suit the changing needs of the aquarium. Depending on the choice of media, the Phos Reactor may be used as a fluidized-bed filter, exposing the maximum amount of the media’s surface area to aquarium water, hence increasing filtration efficiency.
It may be employed as a hang-on-tank or in-sump filter, depending on your aquarium set up. The Phos Reactor can be used in many different applications and accepts Power Phos, Phosphate Sponge, Bio Bind, Reef Carbon, Nitrate Sponge, Organic Adsorption Resin, Copper Sponge, Mixed-Bed Resin.
The Phos Reactor is built from high-quality acrylic and ABS, and utilizes a special twist-lock head that eliminates the need for tedious thumb-screws. The intelligent design of the Phos Reactor makes set-up very simple; in contrast to competing filters, no additional elbows or other plumbing pieces are required for basic operation. |
|
|