IceCap 3000 Information Page |
 |
Features & Specifications:
- Power 1-4 lamps, up to 110 watts
- Common configurations include 2x4ft T8's, 4x small T5's, 2x55W PCs, 1x96W PC, or 2 normal output T12s.
- Can operate Power Compacts
- Soft start system adjusts to lamp load
- Modular unit offers quick disconnect and easy replacement
- Quiet Operation
- High power factor > 0.99
- Ballast Efficacy Factor = 1.48
- 18% more light output with 60 watts input
- Extends lamp life
- No flicker
- Parallel
- No PCB's
- Type II outdoors
- Total Harmonic Distortion <5.3%
- Dimensions: 9-1/2"L x 2-3/8"W x 1-1/2" H
- Made in the USA
- Generate very low heat
- Energy Efficient
- Weight: 1 lb
- Wire lengths: 32"
- In addition to being ETL listed in the USA, the Model 3000 is also
 listed for Canada, Mexico and the USA. Manufacturer Warranty: 3 years from date of purchase.
Typical Operation: |
| Description |
For use with any T8 lamp including U shaped, no restricted to a particular manufacturer. Will light various lamp types including D lamps |
|
Min Start Temp |
10 degrees F |
|
Sound Rating |
A |
|
Type / Watt / Max Current |
F17T8 / 17W / 0.26 AMP
F25T8 / 25W / 0.40 AMP
F32T8 / 32W / 0.52 AMP |
| Please Note: The jumper wires (shown in grey) in the wiring diagrams below can be produced by cutting and stripping a small length of excess wire from the provided harness. Jumpers wires should be AWG #18 Solid TFN wire: |
|
Four - 15W T-5 Lamps
Six - 8W T-5 Lamps
Two/Four Twin Tube Lamps
  |
|
|