Add-On Components (Float Valve Kit, Shut Off Valve Kit, etc.) |
 Comkit Plus - Drinking water assembly kit which includes a 3 gallon pressurized tank for storing product water, bar faucet, shutoff kit for shutting off the RO after the pressurized tank is full, and neccessary fittings for hook-up. (Kent Marine Part No. COMKITPLUS) |
|
|
|
 RO Piggy Back Kit - This kit will allow you to double the output of your current RO system. It comes with all the parts needed to install the unit to your existing membrane. Please select the correct unit to match the membrane on your system. |
|
|
|
 Inline Dual TDS Meter - The Dual TDS meter offers an easy and convenient way of monitoring the performance of your RO or RO/DI unit. It allows you to quickly check the quality of the inlet and outlet water and helps you to determine when the cartridges need to be replaced. It is a great addition to any RO or RO/DI unit. Battery operated. |
|
|
|
 Float Valve - All ABS black high density plastic. No metal parts. Will not rust in Saltwater. Rated for City Water Pressure and will mount in sump, hard plastic pond or garbage can. (Kent Marine Part No. FVKENT) |
|
|
|
 Float Valve Kit - includes both float valve and shutoff kit for shuting off both RO and Deion units. (Kent Marine Part No. FVKITKENT) |
|
|
|
 Flush Valve Kit - allows full stream of water to clean TFC membrane of any buildup to prolong life. (CP Part No. FVK14, KM Part No. FLUSHKIT, SP Part No. VA-FVK-4)
Note: This is not compatible with Coralife RO or RO/DI units. |
|
|
|
 Kent Marine Flush Valve Kit - The FLUSHKIT enables the membrane to be flushed with pressurized water to help remove contaminate buildup and extend membrane life.
Note: This is not compatible with Coralife RO or RO/DI units. |
|
|
|
 Shut-Off Valve Kit - The Shut Off Kit allows RO unit to shutoff or stop producing waste water after the float valve closes. |
|
|
|
 Feed Water Adapter - Allows connecting RO inlet line directly to pipe. |
|
|
|
 Standard Faucet Adapter - Standard faucet fitting to feed R/O or DEION. (CP Part No. FA, KM Part No. FAUS, SP Part No. FAU-SNP) |
|
|
|
 Drain Saddle - Allows running R/O waste line to drain directly to drain pipe. Requires drilling a hole in the pipe. (CP Part No. DS14, KM Part No. DSAD, SP Part No. XDS-4T) |
|
|
|
 Self-Piercing Saddle Valve - Pierces copper pipe to feed R/O or DEION unit. (CP Part No. PSV14, KMPart No. SV, SP Part No. XV-PRC-4T) |
|
|
|
 Plastic Tube Cutter - Cut polyethylene, nylon, or polypropylene with this easy-to-handle razor/edged tube cutter. It closes automatically, assuring clean and square cuts. It may also be used with vinyl, teflon®, polyurethane, rubber, and silicone tubing. To use, insert the plastic tube to desired length. Allow tube cutter to close, then apply pressure until the tube snaps off. Cuts from 1/16in to 5/8in OD tubing. |
|
|
|
 Replacement Garden Hose Adapter - Works with any RO systems, which come with 1/4" tubing. |
|
|
|
 Single Filter Housing Bracket |
|
|
 Metal Bracket for 3-Stage RO Unit
|
|
|
 Plastic Bracket with Clips for 4-Stage RO Unit |
|
|
 Replacement RO Single Clip for RO unit
|
|
|
 Replacement RO Double Clip for Compact/Bare Bone 2-Stage System |
|
|
 Replacement RO Filter Canister - Clear - for 10" sediment filters, carbon block filters and DI cartridges
|
|
|
 Replacement RO Filter Canister - White - 1/4" NO10 Replacement White Canister |
|
|
 Replacement TFC Membrane Housing
|
|
|
 RO Housing Wrench |
|
|
| RO Replacement Tubing:
|
|