1/10 HP (Mini) Current USA Prime Inline Chiller w/ Dual-Stage Thermostat, With External Controller > 1/4 HP & Less > In-Line > Chillers

Home

New Customer? Register | Sign In

Home » Saltwater Aquarium Supplies » Chillers » In-Line » 1/4 HP & Less » With External Controller » 1/10 HP (Mini) Current USA Prime Inline Chiller w/ Dual-Stage Thermostat

1/10 HP (Mini) Current USA Prime Inline Chiller w/ Dual-Stage Thermostat

Avg. Customer Review (6) reviews

Item Code: CU02635

List Price: $559.95

You Save: 129.96 (23%)

Price: $429.99 + $15.00*

Qty:

Availability: Usually ships the same business day

Overweight/Oversized Shipping Charge*

Write a review Email To Friend

No Payments For 90 Days
with Bill Me Later® Details

Overview

Details

Images

Support

Reviews

Accessories

Description

Titanium Heat Exchanger - Corrosion resistant titanium backed by a lifetime warranty offers the peace of mind
High BTU Compressor - Energy efficient 1485 BTU compressor delivers more BTUs than any similar size chiller on the market - providing more coolling power while requiring less electricity
Fits Anywhere - the small size (10" L x 11" W x 14" H) make it easy to fit under almost any size aquarium
Ultra Quiet - compressor runs virtually silent; rubber feet eliminate vibration noise
Integrated Dual Stage Thermostat - controls both the chiller and an external heater up to 300 Watts (heater not included)
Stylish Design - molded cover looks sleek will not rust

What`s included:
Each Prime 1/10th HP Chiller includes an integrated dual-stage digital temperature controller, 1/2" & 5/8" inlet/outlet barb fittings, 6 ft. power cable and complete instructions.

Chiller Sizing Guide
Temperature Difference from Ambient

Degree Pull-Down	10°F	20°F	30°F	40°F
Aquarium Size	80gal	60gal	30gal	15gal

Note: Accessories such as metal halide lighting, submersible pumps, etc… can add a great deal of heat not considered in the above chart. Decrease volume by 25% to determine the horsepower needed to chill that amount of water.

Horsepower: 1/10hp
BTU: 1485
Volts/Amps: 115V/2.15A
Inlet/Outlet: 1/2in & 5/8in
Temp. Range: 60-80°F
Thermostat Type: Dual
w/ Thermal Expansion Valve: No
Dimensions: 10in x 11in x 14in

Pump(s) or some way to circulate water through the chiller are required and sold separately.

Customer Reviews

Write a review

5 of 5 people found the following review helpful:

Excellent!

Excellent... by LIN HTET

Experience Level: Beginner

Posted on 8/12/2007 from DALY CITY, CA UNITED STATES

Comments: Great product...It works....
Yes, I would recommend this product to my friends.

Was this review helpful to you?

2 of 2 people found the following review helpful:

Great

Chiller by MIKE WOLF

Experience Level: Intermediate

Posted on 7/6/2008 from BUTLER, PA UNITED STATES

Comments: This chiller was just what I needed for my tank. Since installing it, which was very easy, my tube worms, coral, and fish are doing much better. It maintains the water temperature within a one and a half degree range. The noise made by the chiller is less than the lower sump on my eco-system. The temperature setting is not lost during a power failure, which, just knowing that, is a big comfort . I used a power head matched to the recommended flow rate for the chiller and placed the power head in the lower sump. The return from the chiller is also returned to the lower sump but behind a baffle which helps to mix the warmer water from above with the chilled water. The only down side to this unit is it can not be placed inside the cabinet or any other cabinet as it needs to dissipate the heat. The cost is well worth it considering the potential loss of costly livestock.
Yes, I would recommend this product to my friends.

Was this review helpful to you?