Kent Marine Full Size RO System Features:
- Three stages
- TFC Membrane
- 1 micron sediment pre-filter
- carbon block matrix filter
- Available 24, 50, 100 GPD production rate
- RO 100 TFC include a second piggy back membrane and membrane housing to double your water output
- Available with blue or clear canisters
- Very economical
GPD : 100
The RO100TFC is a full sized 100 gallon per day RO unit with blue or clear canisters. Full size units provide better pre-filtration and less chance of membrane fouling. This unit will remove an average 94-98% of tap water contaminants. The RO60HiS includes two 50 gallon per day TFC membranes, a CF1M 1 micron sediment pre filter, a CFCE solid carbon block filter, a 3/4 inch garden hose adapter and 6 feet of yellow, blue and orange tubing.
This unit can be run on ANY water system, well or city.
We recommend adding a FLUSHKIT to your system to extend your membrane life, particularly in hard water conditions
Specification:
- Length: 10"
- Width: 5 ¾"
- Height: 19 ½"
- Dry weight: 15 lbs
- Optimal input water temp: 70-77°F, 21-25°C
- Optimal PSI: 65
- Optimal Total Dissolved Solids: <200 ppm
- Input water type: Any water system
- Membrane type: 2 x TFC
- Rated Gallons Per Day: 2 x 50
- Waste to Product ratio: 3g waste to 1g product
- Inhibiting/Damaging tap water chemicals: Iron, Calcium, Magnesium, Heavy Sediment
- Prefilter media #1: CF1M: 10", 1µ, string wound sediment filter
- Prefilter media #2: CFCE: 10", 10µ solid block carbon filter
- Post filter media: N/A
- Supplied input water adapter: Garden Hose Adapter, ¾" standard thread
- Tubing type: ¼" pressure tubing
- Filter change times: NOTE: change times are varied depending on the tap water conditions. Stated times are an average: TFC membrane: 3 to 5 years, CFCE: 3,500 gallons or 6 months, CF1M: 6 months
|