The revolutionary AquaC protein skimmers do not use venturis, downdraft tubes, or air pumps; they employ the patented "Spray Induction System." This innovation allows the protein skimmer to efficiently draw in much more air than any other of the top protein skimmers. This coupled with the superiorly designed compact reaction chamber yields results that will literally blow the waste out of your water.
The redesigned and improved EV Series skimmers raise AquaC`s spray injection skimming (U.S. Patent # 6,156,209) to a new level in terms of efficiency, performance, and value. A new baffling system combined with a significantly larger mixing box results in far less turbulence and increased contact time. The net effect is a dramatic increase in skimmer performance despite a drop in pump pressure requirements. AquaC`s molded spray injector now generates a significantly larger number of microbubbles, boosting overall performance to unbelievable levels considering such low pump pressure requirements.
Features:
- The addition of a precision ball valve for airflow control allows the aquarist to fine tune the skimmer`s output. Unlike most other high performance skimmers in this class, the EV is remarkably silent. The spray injection system does not generate the sucking noises typical of venturi and Beckett units.
- The John Guest "Speedfit" fitting is a great feature you will only find on AquaC ozone-equipped skimmers. This fitting is standard on models EV-240 and above, and can be ordered on the EV-120/180 ($5.00 option). Aquarists may also connect their calcium reactor effluent line to the skimmer`s speedfit connection. The pH of a calcium reactor effluent typically falls between 6.5-6.9, and over time the addition of this low pH effluent can have a deleterious effect on the system`s pH level. By dosing your effluent directly into the skimmer, excess CO2 will be "blown off" into the atmosphere and the tank pH will remain unaffected.
- The improved "Twist-Lock" collection cup and cap makes for a secure, flanged connection without the need for set screws or other locking type unions. Simply twist to crack the seal (EPDM gaskets) and removal requires a scant ¼" clearance. The new EV Series skimmers can be operated with AquaC`s auto-waste container, which are available in 2.5 and 5 liter sizes.
- Increased contact time = more protein removal. The size of the mixing box has been increased on all models by approximately 40%. To accommodate the extra foam the skimmers now feature taller and wider reaction towers, as well.
Specifications:
- Height: 18"
- Included Pump: Mag-Drive 5 (flowrate of 500 gph)
- Footprint: 4.75" x 8.5"
- Foam Tower: 4"OD
- Tank Size: 40-150 gallons
- JG Fitting: optional
- Bubble Size: .03–.05mm
- Water flow-thru rate: 225gph
- Volume of foam produced: 90cu.in.
Mag Drive 5 features:
- Watts: 45
- Pump Size (L x W x H): 5.0 x 3.8 x 4.2
- Outlet Size / Inlet Size: 1/2" MPT / 1/2" FPT
|
|
|
|
Customer Reviews
|
Write a review
|
15 of 15 people found the following review helpful:
|
Great
|
|
Needs some parts
by CHRIS EDWARDS
|
|
Experience Level: Intermediate
|
|
Posted on 10/25/2007 from DEWEY, AZ UNITED STATES
|
|
|
Comments: The Aqua C Product is awesome, great at extracting DOM from seawater. The only problem I had was getting the correct plumbing parts to connect the MAG 5 pump to the skimmer. With a RIO 2100 there are added parts to allow for easy connection to the skimmer (assuming that you have the correct size tubing). Since this is being sold as a "KIT" it should have a few hose clamps and tubing for out of the box installation. You will need tubing, clamps, and a 1.2 adapter to allow you to connect to the MAG 5 pump without stripping the threaded outflow from the pump. I would recommend that you add these parts to your "KITS" and adjust the retail price so that the consumer can set up more easily without having to order 3 or 4 more times from them to get all the parts necessary.
Yes, I would recommend this product to my friends.
|
3 of 35 people found the following review helpful:
|
Average
|
|
over all good, with help
by BRETT PERKINS
|
|
|
|
Posted on 6/15/2007
|
|
|
Comments: I had a little trouble adjusting it with the mag 5 pump, I ended up pinching the spray port to get a stronger spray and that seemed to do the trick, now I cant stop it from producing green foam
I would not recommend this product to my friends.
|
|
|
|
Similar Items
|
|
|
|
Product:
|
|
List Price:
|
|
Our Price:
|
|
|
|
Rating:
|
|
Item Code:
|
|
Description:
|
|
|
|
|
|