AquaC EV240 with Mag-Drive 12 Kit Features:
- Height: 26"
- Included Pump: Mag-Drive 12 (flowrate of 1200 gph)
- Footprint: 6.75" x 10.75"
- Foam Tower: 6"OD
- Tank Size: 80-350 gallons
- JG Fitting: standard
- Bubble Size: .03–.05mm
- Input 1" Hose Barb
- Water flow-thru rate: 550gph
- Volume of foam produced: 320cu.in.
The revolutionary AquaC protein skimmers do not use venturis, downdraft tubes, or air pumps; they employ the patented "Spray Induction System." This innovation allows the protein skimmer to efficiently draw in much more air than any other of the top protein skimmers. This coupled with the superiorly designed compact reaction chamber yields results that will literally blow the waste out of your water.
The redesigned and improved EV Series skimmers raise AquaC`s spray injection skimming (U.S. Patent # 6,156,209, #6,436,295) to a new level in terms of efficiency, performance, and value. A new baffling system combined with a significantly larger mixing box results in far less turbulence and increased contact time. The net effect is a dramatic increase in skimmer performance despite a drop in pump pressure requirements. AquaC`s molded spray injector now generates a significantly larger number of microbubbles, boosting overall performance to unbelievable levels considering such low pump pressure requirement.
Features:
- The addition of a precision ball valve for airflow control allows the aquarist to fine tune the skimmer`s output. Unlike most other high performance skimmers in this class, the EV is remarkably silent. The spray injection system does not generate the sucking noises typical of venturi and Beckett units.
- The John Guest "Speedfit" fitting is a great feature you will only find on AquaC ozone-equipped skimmers. This fitting is standard on models EV-240 and above, and can be ordered on the EV-120/180 ($5.00 option). Aquarists may also connect their calcium reactor effluent line to the skimmer`s speedfit connection. The pH of a calcium reactor effluent typically falls between 6.5-6.9, and over time the addition of this low pH effluent can have a deleterious effect on the system`s pH level. By dosing your effluent directly into the skimmer, excess CO2 will be "blown off" into the atmosphere and the tank pH will remain unaffected.
- The improved "Twist-Lock" collection cup and cap makes for a secure, flanged connection without the need for set screws or other locking type unions. Simply twist to crack the seal (EPDM gaskets) and removal requires a scant ¼" clearance. The new EV Series skimmers can be operated with AquaC`s auto-waste container, which are available in 2.5 and 5 liter sizes.
- Increased contact time = more protein removal. The size of the mixing box has been increased on all models by approximately 40%. To accommodate the extra foam the skimmers now feature taller and wider reaction towers, as well.
Mag Drive 12 Specifications:
- Watts: 110
- Pump Size (L x W x H): 6.4 x 4.5 x 4.6
- Outlet Size / Inlet Size: 3/4" MPT / 3/4" FPT
|
|
|
|
Customer Reviews
|
Write a review
|
4 of 4 people found the following review helpful:
|
Excellent!
|
|
AquaC EV-240 Protein Skimmer
by MICHAEL
|
|
Experience Level: Expert
|
|
Posted on 8/19/2007 from SAN BERNARDINO, CA UNITED STAT
|
|
|
Comments: Awsome Skimmer! Produces lots of foam. If you replace the 3/4 injector with a 1 inch injector and use a mag-18 this skimmer performs like an EV400. Strips my tank clean.
Yes, I would recommend this product to my friends.
|
3 of 3 people found the following review helpful:
|
|
Excellent!
|
|
AquaC EV-240 Protein Skimmer
by LISA
|
|
Experience Level: Intermediate
|
|
Posted on 12/31/2007 from SALT LAKE CITY, UT UNITED STAT
|
|
|
Comments: This skimmer rocks! I'm running it on a 120 gl mixed reef with a 90 gl sump (w/about 30 gl water). It is so effecient that it skims off most of the crud within just a few hours - this allows the flexibility to turn the skimmer off at night to allow my corals to feed, knowing that within hours of kicking on in the morning, the water will be clean enough to please even my most sensitive anemones.
Also, a quick note on Michael's comment: when I opened the box, I was pleased to find an insert from the manufacturer that they have replaced the 3/4" injector with a 1" injector.
Yes, I would recommend this product to my friends.
|
|
|
|
Similar Items
|
|
|
|
Product:
|
|
List Price:
|
|
Our Price:
|
|
|
|
Rating:
|
|
Item Code:
|
|
Description:
|
|
|
|
|
|