0 of 0 people found the following review helpful:

Great

Pretty good.. by RONALD HATTIE

Experience Level: Intermediate

Posted on 6/5/2008 from PHOENIX, AZ UNITED STATES

Comments: I've got a Kent Marine Silica Max RO unit - this cannister is replacing the DI cannister, which cracked. The top of this unit does NOT fit the Kent Marine unit, but all the plumbing attaches fine. I was able to get three screws to attach the cannister, but the fourth won't fit. Its adequate, as the unit sits in a second bathroom, generally out of sight. No leaks. Yes, I would recommend this product to my friends.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Excellent!

Great replacement! by Mike D

Experience Level: Intermediate

Posted on 1/18/2008 from ATLANTA, GA UNITED STATES

Comments: This replacement canister worked like a charm for my ro/di unit. No complaints! Yes, I would recommend this product to my friends.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Unsatisfactory

Will eventually fracture by DAVID GRIESEMER

Experience Level: Intermediate

Posted on 1/13/2008 from RICHARDSON, TX UNITED STATES

Comments: I had something very similar to this as the original canisters that came with my Kent Maxxima filter. Each of the sediment and carbon pre-filter housings lasted a few years but eventually fractured under the constant water pressure. Fortunately, I was at home when each of these broke or there would have been considerable flooding. In fairness, I may have installed them too tight, aggravating the problem. But I still would not recommend using these for your pre-filters. If the water supply is always on to your filter I would recommend using the non see through housings as they are made of a softer material that is much less likely to fracture. I replaced my 2 pre filters with blue canisters but left the acrylic see through filter for the post-filter DI cartridge since that part of the system is not under high pressure (it's nice to be able to see the DI filter to know when it's used up). I would not recommend this product to my friends.

Was this review helpful to you?

1 of 1 people found the following review helpful:

Below Average

Not For Kent Maxima by Reefkeeper

Experience Level: Intermediate

Posted on 9/27/2007 from MOORESVILLE, NC UNITED STATES

Comments: The unit does not fit on the Kent Marine Maxima R.O/D.I. unit. However it is possible to rearrange the connector tubing and buy some JACO fittings that will attach to unit. Doesn't look very clean but it does work. I would not recommend this product to my friends.

Was this review helpful to you?

0 of 1 people found the following review helpful:

Great

good replacement part by KPR

Experience Level: Expert

Posted on 9/20/2007 from REDMOND, WA UNITED STATES

Comments: Near perfect fit for, broken canister, accidentally cracked the old one, fit my RODI with out having to change the top/blue part out. only downside is that it doesn't fit my canister wrenches, not the one I got with my system, or the universal I got at the hardware store, but a strap wrench will work.I would buy again, if I fumbled another canister, and you folks/Fed Ex (2day) got it to me quickly Yes, I would recommend this product to my friends.

Was this review helpful to you?