Color: White
John Guest Part# : PPSV040808W
Tube O.D.: 1/4"
Tube O.D.: 1/4"

How to make a connection:

1. Cut tube square.
   Cut the tube square. It is essential that the outside diameter be free of score marks and that burrs and sharp edges be removed before inserting into fitting. For soft or thin walled plastic tubing we recommend the use of a tube insert.
2. Insert tube.
   Fitting grips before it seals. Ensure tube is pushed in to the tube stop.
3. Push up to tube stop.
   Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the "O" ring provides a permanent leak proof seal.
4. Pull to check secure.
   Pull on the tube to check it is secure. It is good practice to test the system prior to leaving site and/or before use.