0 of 0 people found the following review helpful:

Unsatisfactory

very hard to seal by WILLIAM WALSWORTH

Experience Level: Expert

Posted on 8/26/2008 from FARMINGTON HILLS, MI UNITED ST

Comments: very hard rigid tubing. could not make prevent leaking even with multiple clamps. switched back to vinyl. I would not recommend this product to my friends.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Unsatisfactory

LEAKS!! by BZ

Experience Level: Intermediate

Posted on 7/24/2008 from MC LEAN, VA UNITED STATES

Comments: This seems like a great idea in concept, but without essentially melting or cementing the darn stuff onto the fitting you are attaching it to, it just won't seal. The corrugations prevent hoseclamps from creating a tight seal, even on hosebarb fittings. I'm going back to plain old vinyl. I would not recommend this product to my friends.

Was this review helpful to you?

1 of 1 people found the following review helpful:

Excellent!

Works fine by DREW H YOUNG

Experience Level: Expert

Posted on 6/17/2008 from GREENSBORO, NC UNITED STATES

Comments: I use this material for all connections. To make it work pre-connect before using under hood. Boil water and insert tube to make it soft. Use dish soap as a lubricant and rinse under cold water to set and remove soap residue. Cold water shrink wraps tube over hose barb. Yes, I would recommend this product to my friends.

Was this review helpful to you?

1 of 2 people found the following review helpful:

Unsatisfactory

hated this product! by Rachel

Experience Level: Intermediate

Posted on 2/6/2008 from Alaska

Comments: This tubing SEEMS like a great idea, but when installed in my return and drain lines, i found it impossible to tighten the hose to the hose barb, no matter what i used, it still leaked! I would not recommend this product to my friends.

Was this review helpful to you?