External Aquarium Pump
An external aquarium pump is usually used as a return pump in filter systems, like a sump or wet/dry filter
. An external aquarium water pump can also be used for closed-loop systems to provide extra flow within the aquarium so you don’t clutter up your display tank with submersible pumps
An aquarium external pump is the best option for "high head" applications where water needs to be pumped a long distance vertically—like when the sump
or filter system is on another floor of your home (like in the basement) below the main display tank.
Since aquarium external water pumps have higher flow rates, a single large pump can be used to run multiple pieces of equipment using a flow manifold to divert water to different areas. You can control the amount of water flow using ball valves
to dial in the correct flow rate for each piece of equipment you have running.
The World`s Smartest Return Pump
The M1 is the perfect centrifugal pump for return or closed loop applications up to 2000GPH.
Flow: 2,000 gph (7,500 lph)
Max Head Pressure:21.5 feet (6.5 m)
Built and tested in Colorado!
Reeflo`s Dart/Snapper Silver Hybrid pump have conversion kits that allow you to switch between models thereby adjusting flow and watt draw. This increases the flow range allows you to adjust the p...
Dolphin Amp Master Diamond Pump
Clean Pre filtered Marine/Fresh Water Pump
Lowest Amp Draw Marine Pump.
Very cool running Silent indoor or un protected outdoor use.
Circulates up to 4750 GPH All new engineering usin...
Pumping power: 11,000 l/h (2,906 USgal./h). Energy consumption: 125W to 152W depending on counter-pressure Pumping head: 4.5 m (177 in.), 1 1/2" GAS hose connection Voltage / frequency: 230 V / 50 Hz (115 V / 60 Hz). Cable length:...