Aqua Medic Reducing Tee Fitting - 12mm Reducing Tee Fittings are used for the connection of by pass filters like the Nitratreductor and the Calcium Reactor. Airline-sized tubing can be attached to the tee to feed water to your ca...
CO2-Proof Tubing (Black) CO2-Proof Tubing - Normal airline tubing can lose up to 20% of CO2 through its membrane. Silicone tubing reacts w/ CO2 and render it less efficient (thus the silicone hardening over time under CO2 usage)....
A very high-quality German CO2 check valve for freshwater or marine applications. A mid-level & mid-priced, quality check valve between the Metallic and the Plastic units. Takes 4/6 mm (ID/OD) or 1/8" airline tubing.
Special high viscosity liquid to prevent evaporation and spillage in Bubble Counter. To be used externally only and comes in 50 mL spout cap for easy & direct application. Imported from Germany.
Small, neat, low heat production and very reliable. To be used with pH Controller or Timer to automate the input of CO2. Fits Male Threaded NPT 1/8" (eg: Needle or Metering Valves) or CO2-proof tubing (4/6mm - ID/OD) with its...
These are the highest quality industrial-grade Brass Check Valve from German Air Pressure Systems. They are heavy-duty enough for food-grade liquid as well. Just like you, we also thought that these were unnecessarily overkill for...
Plastic check valve for water plant aquariums. The check valve is usually placed between the CO2 regulator and the bubble to prevent water from back-flowing to the regulator.
This Needle Valve is most suitable for Aquarium use. It can provide down to 10 bubbles of CO2 / minute consistently (at 0 pressure). Fits most CO2 Regulator Kits on the market. Inlet - Male Threaded NPT 1/8" (measures 1/4" OD phys...
Six (6) Outlet Hexo-Manifold This manifold allows you to dispense CO2 to six different tanks with just one CO2 bottle and one CO2 regulator. It can be used in-line, or threaded (1/8" NPT) directly on to the CO2 regulator. A ...