For years the Apex has given owners of the AI Sol lights a great way to control their tank lighting. Now, owners of AI Vega, Hydra or Hydra Fifty-Two will finally be able to wirelessly control their lights through their Apex syste...
Alternate Gyre Mode Modified Cable for IceCap Gyre Interface Module
This cable allows you to run your Maxspect Gyre in both forward and reverse direction by using one full Variable Speed port on your Apex to connect two 0-10v s...
2 Channel AquaSurf or Apex to stream cable assembly. It has 1 RJ45 connector which plugs into the Apex base unit, and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.
Continuous light-level monitoring for your aquarium
With the PAR Monitoring kit you can monitor and log your aquarium’s light levels 24 hours a day through your Apex! The perfect tool to fine tune your lighting on your tank. No...
High quality probe holder that holds up to 3 probes. Holder has two 13mm ports and a larger 15mm port to accommodate the larger Neptune Systems temperature probe.
Slots available for three probes (2 x 13mm, 1 x 15mm)
Authorized bus cables from Digital Aquatics for your ReefKeeper Elite system
Package include the Neptune Systems DOS Dosing Pump and DDR Reservoir
Neptune Systems DOS Information
A multi-purpose dosing and fluid delivery system of uncompromising quality combined with the simplicity of Apex Fusion s...
24V Utility pump for various applications:
ATO (auto-top-off) pump
Feed pump for reactors
Return Pump in nano aquariums
Other water movement needs
14` max. head
*Connects to 24V DC outputs on the 1LINK module or ...
WAV - Extreme flow for your aquarium
The WAV moves water. Plain and simple. More than 4000 gallons per hour of it! Better yet, for the same amount of flow, the WAV is smaller, uses less power, and is quieter than the most popula...
120V AC to 12V DC Power Adapter for use on the AquaController Apex.
Very handy for UPS setups or firmware updates.
The IceCap Maxspect Gyre Interface Module is an after-market product that will allow you to hook up your Maxspect Gyre pump to most 3rd party controllers by using an available 0-10 volt port. This makes the Module very versatile ...
2 Channel light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the 6’ cables have bare wires which connect to 0-10V di...
PB4 4 plug power bar
Strong convenient mounting tabs make installation a breeze!
The PB4 also has upgrade-able firmware so you can take advantage of our developing feature set...
Advanced LED Dimming Cable for Apex VDM Module
Use this cable to connect Aqua Illuminations Sol and Acan Lighting LEDs to the VDM Module
You can have complete control over your AI Sol and supported Acan Lighting LED Ligh...
The SLXs five input ports provide a broad range of monitoring options for all the most common probes.
1 x pH port
The pH port is a standard BNC connection. While any standard probe should work, we suggest using Digital Aquati...
DC24 to Bare wire cable - 10’
For the DIY hobbyists out there. This cable connects to the 24VDC accessory connections on the 1LINK module. This cable has two bare (tinned) wires on the other end so you could connect it up to a ...
Switch Adapter Kit for Digital Aquatics Reef Keeper
Allows you to connect a variety of switch inputs on your SL1 and SL2 ports.
Compatible with both the ReefKeeper Elite and ReefKeeper Lite systems.
Cable Length is 6`. C...
The PM3 probe module, includes support for dissolved oxygen, temperature, and 6 digital inputs. The PM3 features are:
Monitor/Control Dissolved and temperature.
6 digital inputs for float switches, water on floor sensors,...
What is the difference between double junction and single junction porbes?
Single junction probes put the reference electrode in direct contact with aquarium water. Over time, the junction will slowly leak aquarium water into t...
Combination stream and light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the cable contains 1 Din5 connector used t...
Expansion Socket The Digital Aquatics Expansion Socket allows you to control high current devices without affecting your ReefKeeper power budget
Package with New Apex Control System AND Two WAV Powerheads
New Apex Control System Features
Prevents catastrophes by monitoring key parameters in your aquarium, takes corrective actions for you, and alerts you via your s...
1LINK Male - Male cable - 10’
4-pin male to male cable many hobbyists have been waiting for. It is ten feet long. This cable allows you to connect your DOS to the 1LINK thereby eliminating the need for the DOS to be connected t...
Oxyguard Dissolved Oxygen Probe
0 to 19.9 ppm
Lab quality probe w/ 10ft cable
Temperature, Altitude, and Salinity Compensation
Mini Din 6 Connector PC Serial Cable In order to connect the AquaController to a PC, ...
Optional display module for New Apex
Orange Backlight screen
Silver module casing