ESHOPPS Magnetic Probe holder Designed from heavy duty acrylic, this dual-purpose holder, will hold your pH and/or ORP probes as well as the outlet tubing coming out of your Calcium Reactor. Additionally, with the magnet attach...
Neptune Systems EnergyBar 8 The EnergyBar 8 module features 8 independently controllable outlets. With power failure detection, active electrical current monitoring, and failsafe features make this power bar far better than any...
IntellaStrip Technology Our new PC4 is the most advanced power distribution unit in the industry with the ability to keep your system up and running even if you have a device failure. Manual Override Mode Gives you ...
Easily add float switches, water on the floor sensors, etc. to the Apex, Apex Lite, AquaController 3, or AquaController 3 Pro. Simply plug the Breakout box`s minidin 8 cable into the AquaController I/O port, and then attach the fl...
The Wireless Expansion module allows for truely flexible control of Ecotech Marine Vortech and EcoSmart wireless pumps. The WXM features are: Wirelessly controls any of Ecotech`s wireless pumps (WWD or EcoSmart). 11 Independ...
American Marine PINPOINT AC Adapter Kit™ (110vac) The AC adapter kit is optional to replace the 9-volt battery, which some monitor owners find convenient, especially for PINPOINT pH and PINPOINT ORP monitors. Note: Not comp...
The first expansion module, the PM1, with a pH or ORP, temperature, and 6 digital inputs. 4 in 1 goodness with this module! The PM1 probe module is just what you need if you want to monitor pH or ORP in your tank. And, the...
The PM2 probe module, includes support for conductivity (salinity), temperature, and 6 digital inputs. The PM2 features are: Monitor/Control Conductivity and temperature. 6 digital inputs for float switches, water on floo...
Zoo Med MagClip Industrial strength MAGNETIC suction cup with interchangeable clips Never replace your suction cups again! Includes 6 assorted sizes of nylon clips to hold all types of aquarium accessories like pH probes, ORP...
The Variable Speed/Dimming module allows for the control of the Aqua Illuminations LED lighting systems as well as adding an additional 4 0-10V variable speed ports.: Independent control of the white and blue Aqua Illuminati...
2 Channel light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the 6’ cables have bare wires which connect to 0-10V di...
Authorized bus cables from Digital Aquatics for your ReefKeeper Elite system
The EnergyBar 4 module features 4 independently controllable outlets. With power failure detection, active electrical current monitoring, and failsafe features make this power bar far better than any competing units. 4 indep...
The Lunar Simulator Module (LSM) allows the AquaController to control and vary the intensity to a 2 to 5 LED module for a realistic moon cycle simulation. The moonrise and set times follow the true lunar cycle. Features of the Lu...
3’ Male/Male AquaBus cable. Used to connect an AquaBus module (PM1, EB8, etc) to another AquaBus Module or Apex base unit.
2 Channel AquaSurf or Apex to stream cable assembly. It has 1 RJ45 connector which plugs into the Apex base unit, and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.
This leak detection probe, when combined with the ALD (Advanced Leak Detection) Module, will enable your Apex System to alert on any leak or water on the floor. This particular probe is weighted and is perfect for placing on any...
The Advanced Leak Detection module easily connects to any Neptune Apex System (Apex, Lite, or Jr.) and gives you up to four locations of leak detection. Two different types of leak detection probes are available (sold separate...
This leak detection probe, when combined with the ALD (Advanced Leak Detection) Module, will enable your Apex System to alert on any leak or water on the floor. This particular probe is very low profile and is perfect for slidin...
15’ Male/Female AquaBus cable. Extension Aquabus cable used to lengthen AquaBus cables so that modules which are more than 15’ apart can be connect together.
The Socket Expansion box is a small power strip with controllable 2 outlets used to reduce the power load on a direct connect (DC) box. Since power is supplied from a different circuit, the Direct Connect box`s power budget is not...
Email Get alerts to your email, cell phone, or PDA System Status Current system data and channel status over the internet, gives you real-time information about what's going on in your system. RSS feeds Get on going status...
5 x Bus Ports The HUB has 5 bus ports for easy expansion when the traditional daisy chain is not an option. 1 x Power Port 9VDC input voltage for providing additional power to your system. Tech Specs LED Status Indic...
Increased Power Handling The PC1 is useful for controlling those high current devices like chillers and large lighting fixtures. The PC1 can supply up to 15A (10A inductive) to one or more devices. Both outlets controlled as on...
4 X Switch Ports With four switch input ports you can add another level of automation to your tank/system. Add float switches, leak detectors, ATO systems, and much more! IMPORTANT: Never apply power to the switch inputs. They ...