American Marine PINPOINT Salinity Monitor PINPOINT Salinity Monitor™ will accurately and immediately measure the amount of salt in any marine or freshwater system. The reading is fully temperature compensated and the convers...
The RLSS Waveline Interface cable will allow you do connect your Apex-Ready Waveline DC pump to the VDM (variable dimming module) Ports of your Neptune Systems Apex Controller.
Once connected, you can easily program your Apex ...
American Marines PINPOINT pH Controller PINPOINT pH Controller™ is an inexpensive yet rugged controller, which includes the appropriate probe and calibration fluids. This device will automate another electrical device such as a c...
ESHOPPS Magnetic Probe holder Designed from heavy duty acrylic, this dual-purpose holder, will hold your pH and/or ORP probes as well as the outlet tubing coming out of your Calcium Reactor. Additionally, with the magnet attach...
The RKM-SL2 is the newest System Lab module from Digital Aquatics. It's a big leap forward with fully (and individually,) isolated ph and salinity ports. On top of that, the Digital Aquatics salinity probe is equipped with full di...
15’ Male/Female AquaBus cable. Extension Aquabus cable used to lengthen AquaBus cables so that modules which are more than 15’ apart can be connect together.
For years the Apex has given owners of the AI Sol lights a great way to control their tank lighting. Now, owners of AI Vega, Hydra or Hydra Fifty-Two will finally be able to wirelessly control their lights through their Apex syste...
Alternate Gyre Mode Modified Cable for IceCap Gyre Interface Module
This cable allows you to run your Maxspect Gyre in both forward and reverse direction by using one full Variable Speed port on your Apex to connect two 0-10v s...
2 Channel AquaSurf or Apex to stream cable assembly. It has 1 RJ45 connector which plugs into the Apex base unit, and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.
High quality probe holder that holds up to 3 probes. Holder has two 13mm ports and a larger 15mm port to accommodate the larger Neptune Systems temperature probe.
Slots available for three probes (2 x 13mm, 1 x 15mm)
Authorized bus cables from Digital Aquatics for your ReefKeeper Elite system
WAV - Extreme flow for your aquarium
The WAV moves water. Plain and simple. More than 4000 gallons per hour of it! Better yet, for the same amount of flow, the WAV is smaller, uses less power, and is quieter than the most popula...
24V Utility pump for various applications:
ATO (auto-top-off) pump
Feed pump for reactors
Return Pump in nano aquariums
Other water movement needs
14` max. head
*Connects to 24V DC outputs on the 1LINK module or ...
The Hanna Checker Kit includes 4 of the most commonly used Hanna Checkers used in the Reef Aquarium.
Alkalinity (dKH) Checker - conveniently read results in dKH rather than ppm - includes liquid reagent ...
120V AC to 12V DC Power Adapter for use on the AquaController Apex.
Very handy for UPS setups or firmware updates.
The IceCap Maxspect Gyre Interface Module is an after-market product that will allow you to hook up your Maxspect Gyre pump to most 3rd party controllers by using an available 0-10 volt port. This makes the Module very versatile ...
2 Channel light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the 6’ cables have bare wires which connect to 0-10V di...
Advanced LED Dimming Cable for Apex VDM Module
Use this cable to connect Aqua Illuminations Sol and Acan Lighting LEDs to the VDM Module
You can have complete control over your AI Sol and supported Acan Lighting LED Ligh...
PB4 4 plug power bar
Strong convenient mounting tabs make installation a breeze!
The PB4 also has upgrade-able firmware so you can take advantage of our developing feature set...
The SLXs five input ports provide a broad range of monitoring options for all the most common probes.
1 x pH port
The pH port is a standard BNC connection. While any standard probe should work, we suggest using Digital Aquati...
DC24 to Bare wire cable - 10’
For the DIY hobbyists out there. This cable connects to the 24VDC accessory connections on the 1LINK module. This cable has two bare (tinned) wires on the other end so you could connect it up to a ...
Expansion Socket The Digital Aquatics Expansion Socket allows you to control high current devices without affecting your ReefKeeper power budget
American Marine PINPOINT ORP Controller PINPOINT ORP (REDOX) Controller™ is an inexpensive rugged controller complete with a platinum ORP probe. This device will automate another electrical device like an ozonizer or ozone g...
The PM3 probe module, includes support for dissolved oxygen, temperature, and 6 digital inputs. The PM3 features are:
Monitor/Control Dissolved and temperature.
6 digital inputs for float switches, water on floor sensors,...
What is the difference between double junction and single junction porbes?
Single junction probes put the reference electrode in direct contact with aquarium water. Over time, the junction will slowly leak aquarium water into t...