An aquarium powerhead can be used to create water flow within an aquarium but may also be used for a variety of other purposes. You can use a powerhead as a return pump for aquarium filter systems, like sumps
. A powerhead pump can also provide water flow to your media reactor, chiller
or UV sterilizer.
Connecting multiple fish tank powerheads to an aquarium controller
will give you the ability to create more ocean-like water movement, such as random flow patterns, currents or tides. Some of the more sophisticated aquarium powerheads, like the EcoTech VorTech
and Maxspect Gyre
, include their own controller so you can fine-tune the water movement in your aquarium to eliminate dead spots and keep fish and coral happy.
Provides beneficial currents throughout the aquarium. Enhances the biological capability and load factor for all aquariums.
Output: 126 GPH
Air filter to prevent dust and dirt from entering water
"Venturi" aeration feat...
The new pumps Silence 1073.05 is electronically speed-controlled pumps operating on safety extra-low voltage. They are ideal in any aquarium and contain a new micro-processor controlled motor, and can thus be referred to as ...
The RLSS Waveline Interface cable will allow you do connect your Apex-Ready Waveline DC pump to the VDM (variable dimming module) Ports of your Neptune Systems Apex Controller.
Once connected, you can easily program your Apex ...
Impeller Assembly for Aqua Clear 50 (402) Powerhead
Upgrade your old MP10ES EcoSmart Driver to the new MP10QD QuietDrive Driver
MP10 equipped with QuietDrive benefits from greatly reduced motor noise, more output and higher efficiency. The motor, wet side and power supply on the ...
Quick Filter Power Head Attachment—For AquaClear powerhead model 20, 30, 50 and 70. AC Quick Filter Powerhead Attachment removes particles and debris resulting in crystal clear aquarium water. Ideal for polishing water ...
The Deepwater Aquatics Multi-Drive pumps are for use with fresh or saltwater aquariums, ponds, pools or even boating applications. Each pump comes standard with all the fittings you need to get set up quickly for any application. ...
Alternate Gyre Mode Modified Cable for IceCap Gyre Interface Module
This cable allows you to run your Maxspect Gyre in both forward and reverse direction by using one full Variable Speed port on your Apex to connect two 0-10v s...
The NYOS® VIPER 2.0 is a regulable feed pump with 75-500 GPH (300-2.000 l/h)
Adapted to seawater use
high performance zirconium dioxide ceramics
Flow rate can be regulated manually
High performance with low el...
Stronger external magnet to increase the holding power on magnet holders included with Tunze Nano Stream models 6015, 6025 to 1/2" and on models 6045, 6055, and 6095 to 3/4".
Package includes 2 x VorTech MP40wQD pumps and 1 x Battery Backup
VorTech MP10wQD Information The Vortech MP10 has been upgrade to the new QuietDrive driver that reduces noise, improves efficiency and increases flow.
With EHEIM streamON+ you have more flexibility than with any other propeller pumps.
Eheim`s new streamON+ streaming pumps are suitable for use in both marine and in fresh water aquariums. They are small, highly efficient and ...
The Battery Backup Booster accessory allows the EcoTech Battery Backup to be used with the Vectra L1 or M1 return pumps.
Connects inline between the EcoTech Battery Backup and the driver of your Vectra pump.
WAV - Extreme flow for your aquarium
The WAV moves water. Plain and simple. More than 4000 gallons per hour of it! Better yet, for the same amount of flow, the WAV is smaller, uses less power, and is quieter than the most popula...
Tunze NanoStream Rock for 6025, 6045 and 6055
Tunze Safety Connector 6105.500
The Tunze Safety Connector enables normal operation using the TUNZE® power supply (for Controllable Tunze Stream pumps or Wavebox) and can connect a 12V-24V battery or DC supply automatically i...
Comline Pump 900 is ideal for running small media reactors, feeding calcium reactors and small filtration units. It will also work great as a return pump for your all in one aquarium or nano cube. It is mechanically variable from...
Eco-Energetic The innovative motor based on the eco-energetic concept and the newly developed pump technology ensures a very high efficiency at very low maintenance and power consumption. Very Silent Run Special plastic beari...
The Cobalt Nano-Flow 2,600 prop pump creates large and wide laminar water flow rated at 686 gph with only 4 watts of power consumption! Perfect for small reef or planted aquariums to create vital current and to eliminate dead spot...
Tunze Stream 6255 WIDE FLOW is a low voltage DC pump suitable for use with Tunze electronic pump controllers, such as 7092, 7095 and 7096.
Stream 6255 is unique in that incorporates a very large 3" diameter output and produces...
Pumping power: 11,000 l/h (2,906 USgal./h). Energy consumption: 125W to 152W depending on counter-pressure Pumping head: 4.5 m (177 in.), 1 1/2" GAS hose connection Voltage / frequency: 230 V / 50 Hz (115 V / 60 Hz). Cable length:...
With the EcoSmart Upgrade, you can transform your MP40w to an MP40w ES. EcoSmart technology and new modes will create realistic tidal currents within your aquarium. Multiple VorTech units will wirelessly communicate with one anoth...
Replacement Impeller w/ shaft for Taam Rio+ 2500
Small pump, ideal to create water movement in aquariums and turtle tanks. Easy positioning thanks to the patented magnet-suction cup support. The sphere joint and the flow control allow to direct water as necessary.
The Cobalt Neo-Flow 10,000 adjustable DC prop pump creates huge flow up to 2,640 gph! Creating vital current and eliminating dead spots. Adjustable DC power supply, allows flow rates from 50-100% up to 2,640 gph (10,000l/h). Power...