AquaMaxx Small Red Devil Needle Wheel for Sicce PSK-1500 Skimmer Pump
Operation in night mode with Singlecontroller 7091 ; contained in Multicontroller 7094 as a standard. Currents are an energy of life in your aquarium. Turbelle ® electronic circulation pumps are controlled electronically. TUNZ...
Replacement pump housing complete with sealing ring and 4 screws for Eheim Compact+ 2000
for use with Turbelle Stream 6000, 6060, 6080, 6100
made of white ceramic stone and is suitable for freshwater as well as salt water aquariums.
for decorative integration in the aquarium
Replacement pump housing complete with sealing ring and 4 screws for Eheim Compact+ 3000
Replacement Impeller for Eheim Compact+ 2000 (60 Hz)
Tunze Stream 6255 WIDE FLOW is a low voltage DC pump suitable for use with Tunze electronic pump controllers, such as 7092, 7095 and 7096.
Stream 6255 is unique in that incorporates a very large 3" diameter output and produces...
The strainer basket traps large debris to help prolong the life of the pump. It also helps to prime the pump for above-ground installations. 1.5 MPT outlet x 2" slip inlet.
Replacement pump housing complete with sealing ring and 4 screws for Eheim Compact+ 5000
Replacement Impeller for Eheim Compact+ 3000 (60 Hz)
Designed for aquariums with volumes of over 1,500 litres (400 US gal.), the Wavebox Extension 6215.50 should be added to the existing Wavebox. The Wavebox extension contains the Wavebox 6215, however without Wavecontroller. The co...
Tunze Safety Connector 6105.500
The Tunze Safety Connector enables normal operation using the TUNZE® power supply (for Controllable Tunze Stream pumps or Wavebox) and can connect a 12V-24V battery or DC supply automatically i...
Dolphin Amp Master Fresh Water & Clean Marine 6200
most efficient dolphin 1.5" wet end design. Non diamond series pump.
superior john crane 316 seal. Suitable for fresh water and clean pre filtered marine water.
1/2" MPT 3" Riser
1" x ½" Sea Swirl Bushing
Danner Impeller Assembly for WF3000 Pump
Durable C-shaped plastic stand supports any Ocean Currents Wave Maker at 3-1/2" height from the base. 2-1/2" wide x 3" tall round-nosed tab also supports most small (1/2" outlet) powerheads.
The ring controls shape and size of the fan-shaped flat stream outlet on the Pulser and the Rotating/Pulser. Three selectable options:
4 discreet holes in a fan shape
A narrow slot
A wide slot
OCEAN CURRENTS—1/2 IN COUPLING (FPT). 1/2 inch Coupling FPT.