Replacement Body Screw for AquaMaxx HOB-1 Protein Skimmer
Replacement Air Hose for AquaMaxx HOB-1 Protein Skimmer
Replacement Pump for AquaMaxx Cone 2 Protein Skimmers
The new and improved pumps for AquaMaxx protein skimmers are based on the Italian-made Sicce Syncra pumps. These pumps are direct replacements for the standard Sedra-based pumps that came with the AquaMaxx AM-Series skimmer line....
Replacement Cup for AquaMaxx Cone 2 Skimmer
AquaMaxx Replacement Thumb Screw 5/16-18 x 1.0 inch Used on the following AquaMaxx Skimmers and Reactors
AquaMaxx SS-3/4i Skimmer pump hold down
AquaMaxx CR-1 Calcium Reactor lid
AquaMaxx Hang on tank adaptor
AquaMaxx Replacement Thumb Screw M6 x 35mm Used on the following AquaMaxx Skimmers and Reactors
AquaMaxx Hang on Back Skimmer Hang on bracket
Thread Size: M6 X 1.00
Length: 35.000 mm (+/- 0.50)
Replacement Cup Drain for AquaMaxx Protein Skimmers Collection Cup
Replacement Impeller for AquaMaxx Cone-2 Protein Skimmers
Replacement Pump for AquaMaxx AM100, EM100, and CO-1 Protein Skimmers
Replacement Pump for AquaMaxx EM100 Protein Skimmer (Shark 1.5)
Replacement Impeller Wheel for AquaMaxx EM100 Protein Skimmer (Shark 1.5)
Adaptor that allows the air line from a typical protein skimmer to connect with a PhosBan reactor for making the reactor serve as a carbon dioxide adsorption filter.
For use with TwoLittleFishies Phoban Reactor and CDX Media.
Color: Gray John Guest Part# : PI250808S Tube O.D.: 1/4"" Hose Barb: 1/4"" How to make a connection
Cut tube square It is essential that the outside diameter be free of score marks and that burrs and sharp edges be removed ...
Bullet 1 Optional Gate Valve (1.5"), for fine tuning. Strongly recommended.
These hi-tech mufflers are designed for use with Precision Marine Bullet Series, High-Efficiency Protein Skimmers. They will thread into any 1/4” female pipe thread opening and act not only as a silencer, but a mechanical fi...
Designed specifically to fit the authentic Bullet Series, these trick stands will also provide additional space in your stand above a water pump for storage, etc.
Overall Dimensions: 9.5" x 5.5"
Minimum Height: 3.125"