Replacement O-Ring for AquaC Remora/Urchin skimmer
Replacement Cup O-Ring for AquaMaxx AM100 Protein Skimmer
Outlet foam for ASM Mini G Protein Skimmer
Limewood air-stones that provide a very fine bubble and vouminous amount of air to aid in the proper functioning of a Protein skimmer.
Replacement Rubber Bulkhead for ASM G-1X, G-2 Protein Skimmers Outside diameter approximately 1 3/8 inches inside diameter fits 3/4" PVC
AquaMaxx Replacement Thumb Screw M6 x 35mm Used on the following AquaMaxx Skimmers and Reactors
AquaMaxx Hang on Back Skimmer Hang on bracket
Thread Size: M6 X 1.00
Length: 35.000 mm (+/- 0.50)
¾" Kent Marine Black Turbo Venturi Valve
Great for DIY skimmers
3/4in FPT Inlet, 3/4in MPT Outlet
Air inlet: 3/8in OD, 1/4in ID
Recommended flow rate is from 500 to 700gph. Up to 9...
Replacement Collection cup O-ring for ASM G-1 w/ G-500 Pump, G-1X, and Mini G Protein Skimmers
Replacement O-Ring for BakPak waste collection cup
AquaMaxx Replacement Thumb Screw 5/16-18 x 1.0 inch Used on the following AquaMaxx Skimmers and Reactors
AquaMaxx SS-3/4i Skimmer pump hold down
AquaMaxx CR-1 Calcium Reactor lid
AquaMaxx Hang on tank adaptor
Adaptor that allows the air line from a typical protein skimmer to connect with a PhosBan reactor for making the reactor serve as a carbon dioxide adsorption filter.
For use with TwoLittleFishies Phoban Reactor and CDX Media.
Replacement Body O-ring for ASM G-1 w/ G-500 Pump, G-1X Protein Skimmers
CPR-REPLACEMENT WASHER SET Includes: Outlet gasket and inlet gasket Replacement for BakPak, Dual BakPak, all hang on AquaFuges
Replacement Rubber Feet for AquaMaxx In-Sump and Cone Protein Skimmers
Replacement Outlet O-ring for ASM Mini G Protein Skimmer
Replacement Volute O-ring for ASM G-1X, G-2, G-3 Protein Skimmers
Many aquariums suffer from low-pH issues. Sometimes it`s the carbon dioxide that accumulates in the air in closed buildings that won`t let the pH of your aquarium stay up. TwoLittleFishies have the solution: It`s called CDX, a Car...
Replacement Collection Cup O-Ring for AquaMaxx EM100 Protein Skimmer
AquaC Cleaning Brush 1/2" diameter bottle brush on flexible wire, 12 1/2" total length.
CPR-REPLACEMENT INLET Includes: Complete inlet assembly with gasket Replacement for BakPak, Dual BakPak, all hang on AquaFuges
The Bak-Pak Pre-skimmer fits around the powerhead and skims water from the surface of the aquarium where wastes accumulate. The Pre-skimmer makes the Bak-Pak even more efficient.
CPR-REPLACEMENT O-RING Includes: O-ring Replacement for BakPak, Dual BakPak, AquaFuges PS
Replacement Nylon Spacer for ASM G-1 w/ G-500 Pump Protein Skimmer
Designed specifically to fit the authentic Bullet Series, these trick stands will also provide additional space in your stand above a water pump for storage, etc.
Overall Dimensions: 9.5" x 5.5"
Minimum Height: 3.125"
These hi-tech mufflers are designed for use with Precision Marine Bullet Series, High-Efficiency Protein Skimmers. They will thread into any 1/4” female pipe thread opening and act not only as a silencer, but a mechanical fi...