Replacement Cup O-Ring for AquaMaxx AM100, EM100, ConeS CO-1 and ConeS-HOB Protein Skimmers
Replacement Needle Wheel Impeller for the G-300 used on the ASM Mini-G skimmer
Replacement Collection Cup O-Ring for AquaMaxx EM100 Protein Skimmer
Replacement O-Ring for AquaC Remora/Urchin skimmer
AquaMaxx Replacement Thumb Screw M6 x 35mm Used on the following AquaMaxx Skimmers and Reactors
AquaMaxx Hang on Back Skimmer Hang on bracket
Thread Size: M6 X 1.00
Length: 35.000 mm (+/- 0.50)
Outlet foam for ASM Mini G Protein Skimmer
Replacement Pump for all CPR Bak-Pak Models CPR is pleased to announce an exciting new enhancement to our popular Bak-Pak protein skimmer line. The new Accela pump is similar to the Maxi-jet 1200, however, it includes some impor...
Limewood air-stones that provide a very fine bubble and vouminous amount of air to aid in the proper functioning of a Protein skimmer.
Replacement Rubber Bulkhead for ASM G-1X, G-2 Protein Skimmers Outside diameter approximately 1 3/8 inches inside diameter fits 3/4" PVC
AquaMaxx Replacement Thumb Screw 5/16-18 x 1.0 inch Used on the following AquaMaxx Skimmers and Reactors
AquaMaxx SS-3/4i Skimmer pump hold down
AquaMaxx CR-1 Calcium Reactor lid
AquaMaxx Hang on tank adaptor
The AquaC Remora and Remora Pro are undoubtedly the most efficient hang on skimmers available today, and what better than an accessory that boosts their performance by as much as 20%!
The AquaC Surface Prefilter is a special b...
Replacement Collection cup O-ring for ASM G-1 w/ G-500 Pump, G-1X, and Mini G Protein Skimmers
Replacement Body O-ring for ASM G-1 w/ G-500 Pump, G-1X Protein Skimmers
Replacement Outlet O-ring for ASM Mini G Protein Skimmer
CPR-REPLACEMENT WASHER SET Includes: Outlet gasket and inlet gasket Replacement for BakPak, Dual BakPak, all hang on AquaFuges
Replacement O-Ring for BakPak waste collection cup
PSK-2500 Replacement Ceramic Shaft with Rubber Seats
Replacement Volute O-ring for ASM G-1X, G-2, G-3 Protein Skimmers
Replacement Rubber Feet for AquaMaxx In-Sump and Cone Protein Skimmers
CPR-REPLACEMENT O-RING Includes: O-ring Replacement for BakPak, Dual BakPak, AquaFuges PS
CPR-REPLACEMENT INLET Includes: Complete inlet assembly with gasket Replacement for BakPak, Dual BakPak, all hang on AquaFuges
AquaC Cleaning Brush 1/2" diameter bottle brush on flexible wire, 12 1/2" total length.
Replacement Nylon Spacer for ASM G-1 w/ G-500 Pump Protein Skimmer
The Bak-Pak Pre-skimmer fits around the powerhead and skims water from the surface of the aquarium where wastes accumulate. The Pre-skimmer makes the Bak-Pak even more efficient.
Designed specifically to fit the authentic Bullet Series, these trick stands will also provide additional space in your stand above a water pump for storage, etc.
Overall Dimensions: 10" x 6.5"
Minimum Height: 4.125"