Digital clock/thermometer with illuminating light. Accurate measurement of aquarium water or room temperature in F or C. Lifegard Aquatics Little Time & Temp Digital Clock and Temperature Indicator with backlit display and ba...
Reagent kit for 25 Marine Calcium Tests The reagent has a part A (liquid) and part B (powder). For use with Hanna Instruments Checker Marine Calcium Colorimeter ( HN1187 )
Handheld TDS Meter 0-9990 with ATC & Temp, in vinyl carrying case The world’s most popular TDS meter, the TDS-3 is the most reliable and longest lasting meter of its kind. It has a wide range of 0-9990 ppm has a hold button...
2 Channel light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the 6’ cables have bare wires which connect to 0-10V di...
Authorized bus cables from Digital Aquatics for your ReefKeeper Elite system
3’ Male/Male AquaBus cable. Used to connect an AquaBus module (PM1, EB8, etc) to another AquaBus Module or Apex base unit.
Pocket Sized TDS Meter w/ digital thermometer in aquarium-specific packaging. The world’s smallest and lightest TDS meter also comes with a built-in digital thermometer. It is a true pocket size meter, comfortably fitting into...
HANNA instruments` buffer solutions are prepared according to precise formulas and are standardized with a pH meter calibrated according to the NIST standards. The 20 mL sachets are single-dose whereas, for more demanding applica...
2 Channel AquaSurf or Apex to stream cable assembly. It has 1 RJ45 connector which plugs into the Apex base unit, and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.
The Digital Aquatics temp probe is used with all Digital Aquatics controllers as well as modules. It currently comes in two styles, one with an RJ-11 connection and the other with a Molex connection. The different probe styles fu...
The Digital Aquatics temp probe is used with all Digital Aquatics controllers as well as modules. It currently comes in two styles, one with an RJ-11 connection and the other with a Molex connection. The different probe styles fun...
American Marines Wireless Thermometer Sensor Utilizing a radio wave signal, the remote sensor(s) will measure the temperature at the waterproof probe tip and send the information to the PINPOINT Temperature Display Monitor, which...
15’ Male/Female AquaBus cable. Extension Aquabus cable used to lengthen AquaBus cables so that modules which are more than 15’ apart can be connect together.
1 bottle each of 100 ppm and 1,000 ppm calcium calibration fluids. The calcium monitor fluid kit is used to re-calibrate your PinPoint Calcium Monitor. It can also be used to validate the readings from your calcium test kits...
1 bottle each of 1 ppm, 10 ppm and 100 ppm nitrate calibration fluids.
TDS solution are produced with high-quality potassium chloride in various concentrations. They are standardized using a conductivity meter calibrated with NIST potassium chloride. HANNA instruments is one of the few producers to ...
Combination stream and light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the cable contains 1 Din5 connector used t...
Advanced LED Dimming Cable for Apex VDM Module Use this cable to connect Aqua Illuminations Sol and Acan Lighting LEDs to the VDM Module You can have complete control over your AI Sol and supported Acan Lighting LED Ligh...
Tunze pH Calibration Kit 7040.14 pH 5, 7 and 9 buffer solutions for calibrating pH Controllers / Monitors.