Feature(s): Precision of +/- .01 10` coax cable Sealed Ag/AgCI reference. Standard BNC connector
ESHOPPS Magnetic Probe holder Designed from heavy duty acrylic, this dual-purpose holder, will hold your pH and/or ORP probes as well as the outlet tubing coming out of your Calcium Reactor. Additionally, with the magnet attach...
PINPOINT ™ pH Replacement Probe is designed especially with your purpose in mind. It features long, continuous duty expectancy, fast response and, most importantly, is non-toxic to your system. Each probe features a 10 foot ca...
Reagents for phosphate LR (low-range), ascorbic acid method. For use with Hanna Instruments Checker Phosphate Colorimeter. Range: 0.00 to 2.50 mg/L Kit for 100 Tests
Digital clock/thermometer with illuminating light. Accurate measurement of aquarium water or room temperature in F or C. Lifegard Aquatics Little Time & Temp Digital Clock and Temperature Indicator with backlit display and ba...
Handheld TDS Meter 0-9990 with ATC & Temp, in vinyl carrying case The world’s most popular TDS meter, the TDS-3 is the most reliable and longest lasting meter of its kind. It has a wide range of 0-9990 ppm has a hold button...
Easily add float switches, water on the floor sensors, etc. to the Apex, Apex Lite, AquaController 3, or AquaController 3 Pro. Simply plug the Breakout box`s minidin 8 cable into the AquaController I/O port, and then attach the fl...
Digital Aquatics pH Probe w/Calibration Packets Resolution 0.01 pH Cable Length 4 feet Connection Type Male BNC Included Calibration Packets 1 x 7pH calibration packet 1 x 10pH calibration packet Manufacture...
High accuracy with 0.01 pH resolution Two point fast and accurate calibration Usable with virtually any electrode that shares the same connector 3000 hours of battery life HI 1270 small diameter probe fitseasily in...
Large face digital thermometer with alert feature. Display both aquarium water temperature and room temperature in degrees Fahrenheit. Has 4 alert features. Alarm will sound and LED flashes: high temp alert only, low temp alert on...
Temperature probe for Neptune Systems: ACJr, AC3 and PX1000 Only
2 Channel light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the 6’ cables have bare wires which connect to 0-10V di...
This leak detection probe, when combined with the ALD (Advanced Leak Detection) Module, will enable your Apex System to alert on any leak or water on the floor. This particular probe is weighted and is perfect for placing on any...
HANNA instruments` buffer solutions are prepared according to precise formulas and are standardized with a pH meter calibrated according to the NIST standards. The 20 mL sachets are single-dose whereas, for more demanding applica...
3’ Male/Male AquaBus cable. Used to connect an AquaBus module (PM1, EB8, etc) to another AquaBus Module or Apex base unit.
Pocket Sized TDS Meter w/ digital thermometer in aquarium-specific packaging. The world’s smallest and lightest TDS meter also comes with a built-in digital thermometer. It is a true pocket size meter, comfortably fitting into...
The Digital Aquatics temp probe is used with all Digital Aquatics controllers as well as modules. It currently comes in two styles, one with an RJ-11 connection and the other with a Molex connection. The different probe styles fu...
American Marines Wireless Thermometer Utilizing a radio wave signal, the remote sensor(s) will measure the temperature at the waterproof probe tip and send the information to the PINPOINT Temperature Display Monitor, which will d...
2 Channel AquaSurf or Apex to stream cable assembly. It has 1 RJ45 connector which plugs into the Apex base unit, and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.
Authorized bus cables from Digital Aquatics for your ReefKeeper Elite system
The Digital Aquatics temp probe is used with all Digital Aquatics controllers as well as modules. It currently comes in two styles, one with an RJ-11 connection and the other with a Molex connection. The different probe styles fun...
American Marines Wireless Thermometer Sensor Utilizing a radio wave signal, the remote sensor(s) will measure the temperature at the waterproof probe tip and send the information to the PINPOINT Temperature Display Monitor, which...
This leak detection probe, when combined with the ALD (Advanced Leak Detection) Module, will enable your Apex System to alert on any leak or water on the floor. This particular probe is very low profile and is perfect for slidin...
15’ Male/Female AquaBus cable. Extension Aquabus cable used to lengthen AquaBus cables so that modules which are more than 15’ apart can be connect together.
5 x Bus Ports The HUB has 5 bus ports for easy expansion when the traditional daisy chain is not an option. 1 x Power Port 9VDC input voltage for providing additional power to your system. Tech Specs LED Status Indic...