The newly announced MPR - Magnetic Probe Rack is the perfect product for anyone with an existing Apex or those just now picking one up. The MPR has four locations for probes so customers can rig up their pH, ORP, salinity, and tem...
Precision of +/- .01
10` coax cable
Sealed Ag/AgCI reference.
Standard BNC connector
High accuracy with 0.01 pH resolution
Two point fast and accurate calibration
Usable with virtually any electrode that shares the same connector
3000 hours of battery life
HI 1270 small diameter probe fitseasily into a ...
Large face digital thermometer with alert feature. Display both aquarium water temperature and room temperature in degrees Fahrenheit. Has 4 alert features. Alarm will sound and LED flashes: high temp alert only, low temp alert on...
PINPOINT ™ pH Replacement Probe is designed especially with your purpose in mind. It features long, continuous duty expectancy, fast response and, most importantly, is non-toxic to your system. Each probe features a 10 foot ca...
Easily add float switches, water on the floor sensors, etc. to the Apex, Apex Lite, Apex Jr (either PM1 or PM2 module also required) , AquaController 3, or AquaController 3 Pro. Simply plug the Breakout box`s minidin 8 cable into...
Digital Aquatics pH Probe w/Calibration Packets
Resolution 0.01 pH
Cable Length 4 feet
Connection Type Male BNC
Included Calibration Packets 1 x 7pH calibration packet
1 x 10pH calibration packet
LSM Lunar LED String – 3 LEDs
*Use this string of LED in combination with your Apex system and Lunar Simulation Module (LSM)
When you purchase the Apex Controller and Lunar Simulation Module you need to outfit it with a ...
American Marine Inc. is proud to introduce the PINPOINT® Calibration Thermometer, the only truly accurate and affordable digital thermometer system with a large range calibration feature and a replaceable probe. The PINPOINT® Cali...
American Marines Wireless Thermometer Utilizing a radio wave signal, the remote sensor(s) will measure the temperature at the waterproof probe tip and send the information to the PINPOINT Temperature Display Monitor, which will d...
High quality probe holder that holds up to 3 probes. Holder has two 13mm ports and a larger 15mm port to accommodate the larger Neptune Systems temperature probe.
Slots available for three probes (2 x 13mm, 1 x 15mm)
Direct probe connection
Automatic Temperature Compensation
The Primo series of testers provide a fast and dependable way to measure the total dissolved solids or conductivity in your water samples. It...
5 x Bus Ports The HUB has 5 bus ports for easy expansion when the traditional daisy chain is not an option. 1 x Power Port 9VDC input voltage for providing additional power to your system. Tech Specs
LED Status Indic...
Spare pH electrode, with Teflon ® junction, 2 m (6.6') cable, for general purpose, water treatment and agriculture.
Hanna Instruments Replacement Electrode for DiST 5 Waterproof Low Range EC/TDS/Temperature Tester
The HI98100 Checker Plus is the next generation of the original Hanna Checker pH tester. The Checker is the most popular pH meter in the world with over 1 million meters used since its introduction in 1991. From students to resear...