Easier to use and more accurate than chemical test kits EPA approved DPD method Accuracy ±0.03 ppm (mg/L) ±3% of reading 0.01 ppm (mg/L) resolution (250 points) Large, easy to read digits Auto shut-off. Dedicated to a single ...
The Refractometer is a must have for all aquarium hobbyists. The proper salinity is crucial for the survival and health of your fish and corals . This high quality refractometer is extremely accurate and easy to use and calibr...
Designed specifically for aquarium use to measure the salinity of natural sea water (NSW). Most handheld saltwater refractometers available in the hobby are designed and calibrated for testing brine solution, i.e. sodium chlorid...
Precision of +/- .01
10` coax cable
Sealed Ag/AgCI reference.
Standard BNC connector
PINPOINT ™ pH Replacement Probe is designed especially with your purpose in mind. It features long, continuous duty expectancy, fast response and, most importantly, is non-toxic to your system. Each probe features a 10 foot ca...
The Captive Purity Refractometer is an incredibly accurate and easy to use device that eliminates the confusion associated with inexpensive hydrometers. Just place a couple of drops of water on the prism and hold to the light. Rea...
Easily add float switches, water on the floor sensors, etc. to the Apex, Apex Lite, AquaController 3, or AquaController 3 Pro. Simply plug the Breakout box`s minidin 8 cable into the AquaController I/O port, and then attach the fl...
High accuracy with 0.01 pH resolution
Two point fast and accurate calibration
Usable with virtually any electrode that shares the same connector
3000 hours of battery life
HI 1270 small diameter probe fitseasily in...
Our new PC4 is the most advanced power distribution unit in the industry with the ability to keep your system up and running even if you have a device failure.
Manual Override Mode
Gives you ...
Digital Aquatics pH Probe w/Calibration Packets
Resolution 0.01 pH
Cable Length 4 feet
Connection Type Male BNC
Included Calibration Packets 1 x 7pH calibration packet
1 x 10pH calibration packet
The PM2 probe module, includes support for conductivity (salinity), temperature, and 6 digital inputs. The PM2 features are:
Monitor/Control Conductivity and temperature.
6 digital inputs for float switches, water on floo...
10` coax cable
Platinum band electrode.
Standard BNC connector
The first expansion module, the PM1, with a pH or ORP, temperature, and 6 digital inputs.
4 in 1 goodness with this module!
The PM1 probe module is just what you need if you want to monitor pH or ORP in your tank. And, the...
The Advanced Leak Detection module easily connects to any Neptune Apex System (Apex, Lite, or Jr.) and gives you up to four locations of leak detection.
Two different types of leak detection probes are available (sold separate...
Multiple Inputs The RKM-SL1s five input ports provide a broad range of monitoring options for all the most common probes.
1 x pH port: The pH port is a standard BNC connection. While any standard probe should work, we suggest u...
American Marine PINPOINT ORP Replacement Probe
10 foot cord
Platinum wire sensor
High supression cable jacket
Digital Aquatics ORP Probe
Manufacturer: Digital Aquatics
One Male BNC
Cable Length: 6 Feet (2 Meters)
Probe Body: Dia 1/2"
Probe Body: length 6.5"
One Digital Aquatics ORP Probe
Pro-Heat D-58 LED Digital Display Temperature Controller Features:
Max safe output: 800 watt
2-Seperate digital display (water temperature / set temperature)
Dual scale display (°F or °C)
Precision (±1.8°F / ±1°C...
The RKM-SL2 is the newest System Lab module from Digital Aquatics. It's a big leap forward with fully (and individually,) isolated ph and salinity ports. On top of that, the Digital Aquatics salinity probe is equipped with full di...
When HANNA instruments introduced its first version of the pHep (pH electronic paper) in 1986, it immediately revolutionized the standard in pH measurement. pHep`s ease-of-use in combination with its affordability made it possible...
The PH-80 is an economically priced, reliable pH meter that is ideal for testing applications such as hydroponics & gardening, pools & spas, aquariums & reef tanks, water ionizers, drinking water and more.
The Lunar Simulator Module (LSM) allows the AquaController to control and vary the intensity to a 2 to 5 LSM Lunar LED String for a realistic moon cycle simulation. The moonrise and set times follow the true lunar cycle. LSM Lun...
5 x Bus Ports The HUB has 5 bus ports for easy expansion when the traditional daisy chain is not an option. 1 x Power Port 9VDC input voltage for providing additional power to your system. Tech Specs
LED Status Indic...
Professional Waterproof pH/Temp Meter Very reliable waterproof pH meter measures with an accuracy: of +/- 0.02 pH.
Measures pH and Temperature
Auto-ranging three point calibration with digital fine tuning
COM-100: Waterproof EC / TDS / Temp Combo Meter
Ideal for all water quality testing, water purification applications, wastewater regulation, aquaculture, hydroponics, colloidal silver, labs & scientific testing, pools &a...