Conductivity Calibration Solution – 447.0 mS (5-pack)
Use this calibration solution to calibrate your Conductivity Probe and PM2 for RO/DI water quality monitoring.
The American Marine ORP / REDOX Calibration Fluid 400 mV is convenient and easy to use: no mixing is required and highly accurate. Packaged in single--use plastic foil pouches similar to PinPoint pH calibration...
0.00 and 1.00 ppm standards (iron) for Hanna Checker HI721: Iron
Great for testing proper functionality of your Hanna Checker HI721 Checker.
The Digital Aquatics temp probe is used with all Digital Aquatics controllers as well as modules. It currently comes in two styles, one with an RJ-11 connection and the other with a Molex connection. The different probe styles fun...
Digital Aquatics Conductivity Probe Calibration Solution (53 mS)
Reagent kit for 25 Iron Tests Range: 0.00 to 5.00 mg/L
Fluval Sea Hydrometer provides an accurate and convenient method of measuring specific gravity and salt level in marine aquariums. Regular testing is strongly recommended as stable salinity levels are essential for the health of m...
High quality tube holder for your dosing pump.
Slots available for three tubes for 8mm slots
Three strong magnets
Clear acrylic design
The RLSS Waveline Interface cable will allow you do connect your Apex-Ready Waveline DC pump to the VDM (variable dimming module) Ports of your Neptune Systems Apex Controller.
Once connected, you can easily program your Apex ...
ESHOPPS Magnetic Probe holder Designed from heavy duty acrylic, this dual-purpose holder, will hold your pH and/or ORP probes as well as the outlet tubing coming out of your Calcium Reactor. Additionally, with the magnet attach...
The Digital Aquatics temp probe is used with all Digital Aquatics controllers as well as modules. It currently comes in two styles, one with an RJ-11 connection and the other with a Molex connection. The different probe styles fu...
Digital Aquatics pH Calibration Kit Included:
2 x 7.0 pH packets
2 x 10.0 pH packets
15’ Male/Female AquaBus cable. Extension Aquabus cable used to lengthen AquaBus cables so that modules which are more than 15’ apart can be connect together.
HANDHELDS ZT-2: Basic TDS TesterTDS-EZ: Economy TDS TesterTDS-3: TDS Meter with CaseEC-3: Conductivity Meter with CaseTDS-4: Pocket-Size TesterTDS-4TM: Pocket-Size TDS/TemperatureAP-1: AquaPro Water Quality Tester (TDS)AP-2: Aqua...
PINPOINT Electrode Storage Fluid (60ml) PINPOINT Probe storage fluid for pH and ORP/REDOX Probes This is the perfect fluid for the storage of any pH or ORP/REDOX Electrode. American Marine Probe Storage Fluid will keep the tip ...
Alternate Gyre Mode Modified Cable for IceCap Gyre Interface Module
This cable allows you to run your Maxspect Gyre in both forward and reverse direction by using one full Variable Speed port on your Apex to connect two 0-10v s...
2 Channel AquaSurf or Apex to stream cable assembly. It has 1 RJ45 connector which plugs into the Apex base unit, and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.
Reagent kit for 25 Chlorine tests Range: 0.00 to 2.50 mg/L
When precision matters, the Seachem Digital Spoon Scale is the perfect companion tool for the serious aquarist. Accurate and easy to use, it will ensure precise dosing of any chemical or supplement up to 300 grams in 0.1 increment...
American Marines Wireless Thermometer Sensor Utilizing a radio wave signal, the remote sensor(s) will measure the temperature at the waterproof probe tip and send the information to the PINPOINT Temperature Display Monitor, which...
Authorized bus cables from Digital Aquatics for your ReefKeeper Elite system
120V AC to 12V DC Power Adapter for use on the AquaController Apex.
Very handy for UPS setups or firmware updates.
Digital Aquarium Thermometer is fully submersible. Digital readout faces forward in the tank. Suction cup secures the thermometer to the glass.
Replacement Battery Included.
2 Channel light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the 6’ cables have bare wires which connect to 0-10V di...
Advanced LED Dimming Cable for Apex VDM Module
Use this cable to connect Aqua Illuminations Sol and Acan Lighting LEDs to the VDM Module
You can have complete control over your AI Sol and supported Acan Lighting LED Ligh...