The Digital Aquatics temp probe is used with all Digital Aquatics controllers as well as modules. It currently comes in two styles, one with an RJ-11 connection and the other with a Molex connection. The different probe styles fu...
HANDHELDS ZT-2: Basic TDS TesterTDS-EZ: Economy TDS TesterTDS-3: TDS Meter with CaseEC-3: Conductivity Meter with CaseTDS-4: Pocket-Size TesterTDS-4TM: Pocket-Size TDS/TemperatureAP-1: AquaPro Water Quality Tester (TDS)AP-2: Aqua...
Authorized bus cables from Digital Aquatics for your ReefKeeper Elite system
HANNA instruments` buffer solutions are prepared according to precise formulas and are standardized with a pH meter calibrated according to the NIST standards. The 20 mL sachets are single-dose whereas, for more demanding applica...
2 Channel AquaSurf or Apex to stream cable assembly. It has 1 RJ45 connector which plugs into the Apex base unit, and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.
Digital Aquatics pH Calibration Kit Included:
2 x 7.0 pH packets
2 x 10.0 pH packets
Hydra Aquatics Glass Hang-on Thermometer Hydra Aquatics glass aquarium thermometers are designed to hang on to the walls of rimless glass tanks between 3 and 8mm thick. These elegantly crafted glass thermometers are reliable, e...
2 Channel light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the 6’ cables have bare wires which connect to 0-10V di...
Digital Aquatics Conductivity Probe Calibration Solution (53 mS)
15’ Male/Female AquaBus cable. Extension Aquabus cable used to lengthen AquaBus cables so that modules which are more than 15’ apart can be connect together.
PINPOINT Electrode Storage Fluid (60ml) PINPOINT Probe storage fluid for pH and ORP/REDOX Probes This is the perfect fluid for the storage of any pH or ORP/REDOX Electrode. American Marine Probe Storage Fluid will keep the tip ...
American Marines Wireless Thermometer Sensor Utilizing a radio wave signal, the remote sensor(s) will measure the temperature at the waterproof probe tip and send the information to the PINPOINT Temperature Display Monitor, which...
Aqua Medic Redox ORP Calibration Fluid It is recommended to recalibrate controllers and monitors monthly. Use Aqua Medic`s Redox ORP Calibration Fluid to aid in recalibrating your controller or monitor.
High quality tube holder for your dosing pump.
Slots available for three tubes for 8mm slots
Three strong magnets
Clear acrylic design
Switch Adapter Kit for Digital Aquatics Reef Keeper
1 bottle each of 100 ppm and 1,000 ppm calcium calibration fluids. The calcium monitor fluid kit is used to re-calibrate your PinPoint Calcium Monitor. It can also be used to validate the readings from your calcium test kits...
Advanced LED Dimming Cable for Apex VDM Module
Use this cable to connect Aqua Illuminations Sol and Acan Lighting LEDs to the VDM Module
You can have complete control over your AI Sol and supported Acan Lighting LED Ligh...
1 bottle each of 1 ppm, 10 ppm and 100 ppm nitrate calibration fluids.
American Marine Pinpoint Conductivity Fluid 60ml PINPOINT® Conductivity Calibration Fluid 60ml 45.0 µS standardized fluid for calibrating the PINPOINT® Conductivity Monitor
Hanna Instruments Electrode Cleaning Solution, 130 ml
High quality probe holder that holds up to 3 probes. Holder has two 13mm ports and a larger 15mm port to accommodate the larger Neptune Systems temperature probe.
Slots available for three probes (2 x 13mm, 1 x 15mm)
pH Buffer Solution Variety Pack HM Digital's pH buffer solution comes in powder form, so it's lightweight, takes up very little space, is inexpensive and has an indefinite shelf life. FEATURES
Variety pack of pH buffer s...
Fluval Sea Hydrometer provides an accurate and convenient method of measuring specific gravity and salt level in marine aquariums. Regular testing is strongly recommended as stable salinity levels are essential for the health of m...
Digital Aquarium Thermometer is fully submersible. Digital readout faces forward in the tank. Suction cup secures the thermometer to the glass.
Replacement Battery Included.
Combination stream and light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the cable contains 1 Din5 connector used t...