External Aquarium Pump
An external aquarium pump is usually used as a return pump in filter systems, like a sump or wet/dry filter
. An external aquarium water pump can also be used for closed-loop systems to provide extra flow within the aquarium so you don’t clutter up your display tank with submersible pumps
An aquarium external pump is the best option for "high head" applications where water needs to be pumped a long distance vertically—like when the sump
or filter system is on another floor of your home (like in the basement) below the main display tank.
Since aquarium external water pumps have higher flow rates, a single large pump can be used to run multiple pieces of equipment using a flow manifold to divert water to different areas. You can control the amount of water flow using ball valves
to dial in the correct flow rate for each piece of equipment you have running.
Clamp holder for Turbelle® stream and e-jet; attachment to magnet holders 6065.50 and 6205.50; suitable for the reduction of pumping noises.
Coralife circulation pumps simulate natural reef and river currents by continuously circulating the water in your aquarium. Three sizes with lab certified flow ratings make it easy to find the right fit for your application. Each ...
Pumping power: 11,000 l/h (2,906 USgal./h). Energy consumption: 125W to 152W depending on counter-pressure Pumping head: 4.5 m (177 in.), 1 1/2" GAS hose connection Voltage / frequency: 230 V / 50 Hz (115 V / 60 Hz). Cable length:...
Wavemaker 2 Low Voltage Pump Controller Great Flexibility: 1 or 2 Koralia 12V low voltage pumps, same or different models. 2 blue LEDs on front panel indicate pump setting and functioning. Wave or Tide Effect: WAVEM...
Fits all SAS & Aqua Sea Pumps + Other Mfg 48 Frame Pumps
Tunze Stream 6255 WIDE FLOW is a low voltage DC pump suitable for use with Tunze electronic pump controllers, such as 7092, 7095 and 7096.
Stream 6255 is unique in that incorporates a very large 3" diameter output and produces...
Comline Pump 900 is ideal for running small media reactors, feeding calcium reactors and small filtration units. It will also work great as a return pump for your all in one aquarium or nano cube. It is mechanically variable from...
The EcoDrift is a fully controllable pump and wave maker. It features a safe 24VDC motor and utilizes a magnet holder that swivels a 180 degrees.
Wave-controller allows for control of output and wave frequency. Additional contro...
Hydor Koralia Wavemaker Pump Extension Cord The EXTENSION CABLE is the accessory designed by Hydor to suite all the needs of the most professional hobbyists. 2 m (6.6 ft) long, the EXTENSION CABLE guarantees the connection betw...
Hydor Koralia Wavemaker Photocell Automatic Night Mode: In this mode the pumps can be slowed down during the night and turned back to the set speed during the day. Night Mode: Indicated by a red LED, can come on automatically...
Sealing O-Ring for Eheim 1048 pump front cover (Eheim Part # 7264400).
Includes two O-rings
Tunze NanoStream Rock for 6025, 6045 and 6055
The strainer basket traps large debris to help prolong the life of the pump. It also helps to prime the pump for above-ground installations. 1.5 MPT outlet x 2" slip inlet.
Replacement Wet-side assembly for EcoTech Marine VorTech MP10. Includes Wet Frame with Axle, Rotor, and Nozzle.
Built and tested in Colorado!
The SwordTail is Reeflo`s new pressure rated version of the Dart that is perfect for 75-150 gallon tanks. It uses the same motor and pump head but the impeller is customized to allow to flow up t...
Tunze Safety Connector 6105.500
The Tunze Safety Connector enables normal operation using the TUNZE® power supply (for Controllable Tunze Stream pumps or Wavebox) and can connect a 12V-24V battery or DC supply automatically i...
Replacement holding ring for Eheim 1260/1262
Danner Impeller Assembly for WF3000 Pump
Maxspect Gyre Reinforced Magnet Kit for XF-150
Reinforced Magnet Kit for up to 30mm (1 1/4") thick glass/acrylic panel.
Eco-Energetic The innovative motor based on the eco-energetic concept and the newly developed pump technology ensures a very high efficiency at very low maintenance and power consumption. Very Silent Run Special plastic beari...
AquaMaxx Small Red Devil Needle Wheel for Sicce PSK-1500 Skimmer Pump
TUNZE® Magnet Holder 6080.50 and 6200.50 are used to attach all Turbelle® pumps and Comline components. This patented holding device has a very high holding power, and can be used to attach all other TUNZE® devices to the aquarium...
The Cobalt Neo-Flow 10,000 adjustable DC prop pump creates huge flow up to 2,640 gph! Creating vital current and eliminating dead spots. Adjustable DC power supply, allows flow rates from 50-100% up to 2,640 gph (10,000l/h). Power...
Maxspect Gyre Pump Magnet Grip Pads (set of 2 pcs)
Rubber suction cup drip pads help hold the pump in place when under extreme torque or thicker glass or acrylic panels. Helps keeps the Gyre from slipping.
Replacement Impeller for Eheim Compact+ 2000 (60 Hz)