External Aquarium Pump
An external aquarium pump is usually used as a return pump in filter systems, like a sump or wet/dry filter
. An external aquarium water pump can also be used for closed-loop systems to provide extra flow within the aquarium so you don’t clutter up your display tank with submersible pumps
An aquarium external pump is the best option for "high head" applications where water needs to be pumped a long distance vertically—like when the sump
or filter system is on another floor of your home (like in the basement) below the main display tank.
Since aquarium external water pumps have higher flow rates, a single large pump can be used to run multiple pieces of equipment using a flow manifold to divert water to different areas. You can control the amount of water flow using ball valves
to dial in the correct flow rate for each piece of equipment you have running.
Rio® & Rio Plus Aqua Pump/Powerheads provide a versatile water pumping system designed with high efficiency and reliability at lower cost. Designed with next-generation magnetic-rotor technology, Rio® & Rio Plus Aqua...
The new EHEIM Compact Pump series for use under water is available with three different outputs: 80, 160 and 265 gph. They are suitable for use in aquariums, keeping and rearing tanks where reliable water conveyance, circulation...
The Maxi-Jet Pro is a multi-use, 3-in-1 pump. It is completely adaptable to meet different needs of internal and external functions as a power head, circulation pump or utility pump. This submersible pump is ideal for powering und...
LIFEGARD® QUIET ONE® PRO SERIES PUMPS
ECO-SAV™ runs cooler and generates more power with less energy consumption.
Internal recirculation prevents overheating and ejects obstructing debris.
Remarkable impeller technology pr...
Replacement impeller for Danner Mag-Drive Supreme 3 and 5 Pump. Includes impeller shaft and bushings.
JBJ introduces the extremely efficient ACCELA™ Powerhead. This submersible pump is ideal for use with undergravel filters and provides water circulation within fresh or saltwater aquariums.
ACCELA™ powerhead motors are epoxy-se...
These powerheads feature the Rejuvenating Venturi design. By drawing the air directly into the impeller, it is able to create a much stronger suction for air: which works great for drawing air out of overflow boxes (such as the CP...
Introducing the Sure Grip Magnetic Powerhead Holder. An innovative new way of attaching powerheads to your aquarium. Now your powerhead can be placed anywhere on the wall of your glass or acrylic aquarium. Offered in two sizes to ...
Flow Rate: 65 GPH maximum with a 26" shut-off
Power Consumption: 5 Watts
Pump Size (L x W x H): 2.5" x 1.8" x 2.8"
Outlet Size / Inlet Size: No Thread
Built-in adjustable flow control
6` grounded powe...
AquaMaxx Large Red Devil Needle Wheel for Sicce PSK-2500 Skimmer Pump
AquaMaxx Inlet Venturi for Sicce PSK-2500 Skimmer Pump
2" union fitting
Fits all Dolphin Aqua Sea pumps with 2" ports
Stronger external magnet to increase the holding power on magnet holders included with Tunze Nano Stream models 6015, 6025 to 1/2" and on models 6045, 6055, and 6095 to 3/4".
Impeller Assembly for Aqua Clear 50 (402) Powerhead
Flow Rate: 80 GPH maximum flow with a 3` shut-off
Power consumption: 6 Watts
Pump Size (L x W x H): 2.9" x 2.2" x 2.7"
Outlet Size / Inlet Size: No Thread
6` grounded power cord
Built-in adjustable flow con...
Clamp holder for Turbelle® stream and e-jet; attachment to magnet holders 6065.50 and 6205.50; suitable for the reduction of pumping noises.
AquaMaxx Small Red Devil Needle Wheel for Sicce PSK-1500 Skimmer Pump
Replacement Impeller for Eheim Compact+ 2000 (60 Hz)