American Marine PINPOINT Conductivity Monitor PINPOINT Conductivity Monitor™ is an instrument for the measurement of hardness in freshwater. The conversions are 33 µS=17.9 ppm=1dH. Good quality reverse osmosis water measures...
American Marine PINPOINT II Oxygen Monitor PINPOINT II Oxygen Monitor™ will quickly and accurately display a digital readout for dissolved oxygen in either % oxygen or ppm saturation. The measurement range is 00.0-20.0...
Tunze Cleaning Solution for pH, mV (ORP), and conductivity probes.
The HI 98129 Combo waterproof tester offer high accuracy pH, EC/TDS and temperature measurements in a single tester! No more switching between meters for your routine measurements. The waterproof Combo (it even floats) has a large...
The Lunar Simulator (LS) allows the AquaController to control and vary the intensity to a 2 to 5 LED module for a realistic moon cycle simulation. The LS uses high intensity LEDs with a wide angle lense (100+ degrees) to provide t...
This handy pH pen/meter is a great tool for any aquarist. It is extremely easy to use and is waterproof. Simply dip the meter in the solution to get the pH reading. Its high accuracy and resolution also make it suitable even for t...
The original DiST (Dissolved Solids Tester) was first introduced in 1986 by HANNA instruments. Since then, Conductivity and Total Dissolved Solids measurements have never been easier. DiST`s ease-of-use, in combination with its af...
TDS solution are produced with high-quality potassium chloride in various concentrations. They are standardized using a conductivity meter calibrated with NIST potassium chloride. HANNA instruments is one of the few producers to ...
Spare pH electrode, with Teflon ® junction, 2 m (6.6') cable, for general purpose, water treatment and agriculture.
American Marine pH/ORP Extension Cable PINPOINT 15 foot extension cable for the pH or the ORP/REDOX probe. This will add an additional 15 feet onto the 10 feet of the probe cable for a total of 25 feet. This extension cable wil...
Expansion Socket The Digital Aquatics Expansion Socket allows you to control high current devices without affecting your ReefKeeper power budget
The Tunze CO2 Controller Set (7074/2) consists of pH Controller 7070/2, CO2 valve kit 7074.11 (including power supply unit 5012.01). The pH controller precisely monitors the pH of the aquarium and opens or closes t...
PinPoint Temperature Controller can easily handle up to a 1/2HP chiller and 700 Watts of heaters (12 Amps). The PinPoint Temperature Controller is a dual-stage controller that can also be use as a single-stage controller. The temp...
The Tunze Water Level Alarm (7607/2) has three sensors: one run-dry protection sensor and two overflow sensors. Each sensor comes with a holding device which can be stuck with silicone or clamped to horizontal or vertical pan...
Tunze pH Calibration Kit 7040.14 pH 5, 7 and 9 buffer solutions for calibrating pH Controllers / Monitors.
AquaMedic ORP Electrode Aqua Medic Redox-potential Electrode is a high quality product designed for precision measurements, and have long, trouble-free operational use. This is a standard electrode with plastic shaft.
Tunze Conductivity Calibration Solution - 7030.14 For saltwater use 50ms/cm
Calibration kit for Neptune AquaController Dissolved Oxygen Probe.
Tunze Temperature Controller Set (7028/3) This temperature controller can accurately monitor the tank`s temperature and control a device (either a heater or a chiller) to maintain that temperature. Switching ...
TUNZE CONDUCTIVITY METER 7032/2 The Tunze Condictivity Meter will accurately monitor the salinity of the water (translated from conductivity). It can be used for freshwater, brackish water or saltwater. The unit&nb...
Oxyguard Dissolved Oxygen Probe 0 to 19.9 ppm Lab quality probe w/ 10ft cable Temperature, Altitude, and Salinity Compensation Mini Din 6 Connector PC Serial Cable In order to connect the AquaController to a PC, ...
The conductivity cells are plastic bodied cells with two parallel graphite electrodes. These cells feature wide measuring range, rugged design, low maintenance and easy cleaning ideal for universal application in on-line monitorin...
The Tunze mV(ORP) Controller Set, 7075, consists of mV controller 7071/2 and switched socket outlet 7075.11 (including power supply unit). The mV ORP controller precisely measures the ORP of your tank. A high-quali...
Laboratory Grade ORP Probe with 10-ft Cable Combination ORP Probe with 10-ft. cable and BNC connector. Rugged ½-in. epoxy body features a recessed bulb design, which protects the sensitive platinum electrode from damage. Manufact...
Laboratory combination pH electrode with ceramic junction for field applications.