Reagent kit for 25 Chlorine tests Range: 0.00 to 2.50 mg/L
PINPOINT ™ pH Replacement Probe is designed especially with your purpose in mind. It features long, continuous duty expectancy, fast response and, most importantly, is non-toxic to your system. Each probe features a 10 foot ca...
Precision of +/- .01
10` coax cable
Sealed Ag/AgCI reference.
Standard BNC connector
Digital clock/thermometer with illuminating light. Accurate measurement of aquarium water or room temperature in F or C. Lifegard Aquatics Little Time & Temp Digital Clock and Temperature Indicator with backlit display and ba...
Large face digital thermometer with alert feature. Display both aquarium water temperature and room temperature in degrees Fahrenheit. Has 4 alert features. Alarm will sound and LED flashes: high temp alert only, low temp alert on...
Easily add float switches, water on the floor sensors, etc. to the Apex, Apex Lite, Apex Jr (either PM1 or PM2 module also required) , AquaController 3, or AquaController 3 Pro. Simply plug the Breakout box`s minidin 8 cable into...
Temperature probe for Neptune Systems: ACJr, AC3 and PX1000 Only
10` coax cable
Platinum band electrode.
Standard BNC connector
The RKM-SL2 is the newest System Lab module from Digital Aquatics. It's a big leap forward with fully (and individually,) isolated ph and salinity ports. On top of that, the Digital Aquatics salinity probe is equipped with full di...
HANNA instruments` buffer solutions are prepared according to precise formulas and are standardized with a pH meter calibrated according to the NIST standards. The 20 mL sachets are single-dose whereas, for more demanding applica...
American Marines Wireless Thermometer Utilizing a radio wave signal, the remote sensor(s) will measure the temperature at the waterproof probe tip and send the information to the PINPOINT Temperature Display Monitor, which will d...
American Marine PINPOINT ORP Replacement Probe
10 foot cord
Platinum wire sensor
High supression cable jacket
Digital Aquatics RKM-MLC w/ 2 Lunar White Pods Tech Specs LED Status Indicator Connections Six Pod Ports Two Bus Ports Physical Details Dimensions: 1.0" x 2.25" x 4.30" Package Contents One RKM-MLC Module...
American Marines Wireless Thermometer Sensor Utilizing a radio wave signal, the remote sensor(s) will measure the temperature at the waterproof probe tip and send the information to the PINPOINT Temperature Display Monitor, which...
The ALC is designed to control LED Ballasts and light fixtures (with a 0-10v inputs). It can provide advanced options for controlling other AI Sol LED Fixtures. Also works for for Kessil LED fixtures: A160WE, A360W, A...
Spare electrode for HI 98121, HI 98127, HI 98128, HI 98129 and HI 98130
Expansion Socket The Digital Aquatics Expansion Socket allows you to control high current devices without affecting your ReefKeeper power budget
DC Pump Control... now available with all ReefKeeper systems!
The new DCI module allows you to expand your existing ReefKeeper system even further - offering full control over 24V direct current (DC) pumps that use round 3-pi...
The original DiST (Dissolved Solids Tester) was first introduced in 1986 by HANNA instruments. Since then, Conductivity and Total Dissolved Solids measurements have never been easier. DiST`s ease-of-use, in combination with its af...
Spare pH electrode, with Teflon ® junction, 2 m (6.6') cable, for general purpose, water treatment and agriculture.
Calibration kit for Neptune AquaController Dissolved Oxygen Probe.
American Marine pH/ORP Extension Cable PINPOINT 15 foot extension cable for the pH or the ORP/REDOX probe. This will add an additional 15 feet onto the 10 feet of the probe cable for a total of 25 feet. This extension cable wil...
TDS solution are produced with high-quality potassium chloride in various concentrations. They are standardized using a conductivity meter calibrated with NIST potassium chloride. HANNA instruments is one of the few producers to ...
Hanna Instruments Replacement Electrode for DiST 5 Waterproof Low Range EC/TDS/Temperature Tester