Digital Aquatics ReefKeeper Systems
With systems starting under $150 ReefKeeper control systems can handle tanks from 10-10000 gallons! Flexibility, expandability, style and function make Digital Aquatics controller a gre...
2 Channel light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the 6’ cables have bare wires which connect to 0-10V di...
Professional Waterproof pH/Temp Meter Very reliable waterproof pH meter measures with an accuracy: of +/- 0.02 pH.
Measures pH and Temperature
Auto-ranging three point calibration with digital fine tuning
Neptune Systems AquaController Apex System w/ pH Probe Introducing the AquaController Apex. The professional equipment your reef deserves is now within reach.
1 - Apex Base Unit 1 - Apex Display 1 - Ene...
Advanced LED Dimming Cable for Apex VDM Module
Use this cable to connect Aqua Illuminations Sol and Acan Lighting LEDs to the VDM Module
You can have complete control over your AI Sol and supported Acan Lighting LED Ligh...
PB4 4 plug power bar
Strong convenient mounting tabs make installation a breeze!
The PB4 also has upgrade-able firmware so you can take advantage of our developing feature set...
pH Buffer Solution Variety Pack HM Digital's pH buffer solution comes in powder form, so it's lightweight, takes up very little space, is inexpensive and has an indefinite shelf life. FEATURES
Variety pack of pH buffer s...
The SLXs five input ports provide a broad range of monitoring options for all the most common probes.
1 x pH port
The pH port is a standard BNC connection. While any standard probe should work, we suggest using Digital Aquati...
DC24 to Bare wire cable - 10’
For the DIY hobbyists out there. This cable connects to the 24VDC accessory connections on the 1LINK module. This cable has two bare (tinned) wires on the other end so you could connect it up to a ...
Switch Adapter Kit for Digital Aquatics Reef Keeper
Allows you to connect a variety of switch inputs on your SL1 and SL2 ports.
Compatible with both the ReefKeeper Elite and ReefKeeper Lite systems.
Cable Length is 6`. C...
The PINPOINT II Calcium Monitor™ is the only truly affordable and accurate digital Calcium measurement instrument. Powered by a 9-volt battery (not included) or the Pinpoint AC Adapter Kit (not included). The PINPOINT II Calcium M...
PinPoint Temperature Controller can easily handle up to a 1/2HP chiller and 700 Watts of heaters (12 Amps). The PinPoint Temperature Controller is a dual-stage controller that can also be use as a single-stage controller. The temp...
The PM3 probe module, includes support for dissolved oxygen, temperature, and 6 digital inputs. The PM3 features are:
Monitor/Control Dissolved and temperature.
6 digital inputs for float switches, water on floor sensors,...
1 bottle each of 1 ppm, 10 ppm and 100 ppm nitrate calibration fluids.
American Marine Pinpoint Conductivity Fluid 60ml PINPOINT® Conductivity Calibration Fluid 60ml 45.0 µS standardized fluid for calibrating the PINPOINT® Conductivity Monitor
What is the difference between double junction and single junction porbes?
Single junction probes put the reference electrode in direct contact with aquarium water. Over time, the junction will slowly leak aquarium water into t...
American Marine PINPOINT ORP Controller PINPOINT ORP (REDOX) Controller™ is an inexpensive rugged controller complete with a platinum ORP probe. This device will automate another electrical device like an ozonizer or ozone g...
Combination stream and light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the cable contains 1 Din5 connector used t...
American Marine is proud to introduce the PINPOINT™ Nitrate Monitor. The only truly affordable and accurate digital Nitrate measurement instrument engineered for marine saltwater. The PINPOINT™ Nitrate Monitor has been designed as...
Expansion Socket The Digital Aquatics Expansion Socket allows you to control high current devices without affecting your ReefKeeper power budget
The NEO-STAT electronic temperature controller turns any aquarium, terrarium, reptile heater, pad, or heat lamp into a precision controlled device. The advanced circuitry controls your heater in place of the original thermostat mo...
Package with New Apex Control System AND Two WAV Powerheads
New Apex Control System Features
Prevents catastrophes by monitoring key parameters in your aquarium, takes corrective actions for you, and alerts you via your s...
1LINK Male - Male cable - 10’
4-pin male to male cable many hobbyists have been waiting for. It is ten feet long. This cable allows you to connect your DOS to the 1LINK thereby eliminating the need for the DOS to be connected t...
Digital Aquatics Rk Elite (Complete System W/Net)
The ReefKeeper Elite is true to its name, standing alone in the industry as the most innovative aquarium controller on the market. With the most intuitive interface and easy t...
Oxyguard Dissolved Oxygen Probe
0 to 19.9 ppm
Lab quality probe w/ 10ft cable
Temperature, Altitude, and Salinity Compensation
Mini Din 6 Connector PC Serial Cable In order to connect the AquaController to a PC, ...