Lifegard Aquatics Pelletized Activated Carbon Keeps fish and invertebrates healthy by adsorbing numerous chemicals, organic contaminants and some metals. Removes colors and odors from aquariums. Removes pollutants that mechanical...
Lifegard Aquatics 3" X 3" Algae Pad—Glass aquariums Surface friendly algae scrub pads are safe, non-toxic and easy to use for removing line scum, unsightly algae and other deposits that form on aquarium surfaces.
Lifegard Aquatics Silicone Lubricant 0.75 oz.
Lubricates connecting parts
Extends the life of rubber parts
Will not cause o-rings/seals to crack
Lifegard Aquatics 3 inch O-ring for QL Caps Works for all QL models and AF filter modules.
19 1/2" 20 Micron Cartridge CL-19 for Lifegard Aquatics AF-94 Double Inline Mechanical Filter (requires 19" standpipe)
Biological media for fluid bed filters. Provides higher surface area (71 square feet per pound). Self cleaning. Improves filtration in any make or model.
Part#: 270576 Size: 1/2" Hole Size: 1 1/8" This bulkhead is slip both the front and back. A PVC pipe (or other slip PVC fittings) can be glued into either end of the bulkhead.
**Variations of this product can be fou...
Pressure Gauge Adapter & Air Bleed for Lifegard Aquatics Inline Mechanical Filter
Gasket for Lifegard Aquatics Inline Heater Modules and QL units.
Protective Sleeve for Lifegard Aquatics QL-10 Inline Ultraviolet Sterilizer Module, R177333
Lifegard Aquatics 3 inch Cap with couplings - R175109
For all biological and mechanical filters where excess debris is needed to be removed thru overflows or sumps. Size: 24" x 15", 360 sq inches.
Lifegard Aquatics Large Handle Scrubber. Fine grade pad on molded handle for cleaning all sizes of aquariums. A new low cost scrubber with permanent white fine grade pad on a molded handle.
Lifegard Aquatics 1 1/2" Bio-Mate Bioballs Provides the maximum surface area and the greatest possible mix of air and water! Promotes gas exchange and increases oxygen level Will not clog with organic matter Totally inert and non...
9" 20 Micron Cartridge CL-9 for Lifegard Aquatics AF-94 Single Inline Mechanical Filter (requires 9 3/4" standpipe)
Replacement Pressure Gauge, 0-30 PSI. Bottom Mount for Lifegard Aquatics Inline Mechanical Filters
9 3/4" Standpipe for Lifegard Aquatics AF-94 Single Inline Mechanical Filter
Cartridge Plug for Lifegard Aquatics AF-94/93 Mechanical/Chemical Filter
PL-9 Replacement Pleat for Lifegard Aquatics Inline Mechanical Filter. 2 per package.