LSM Lunar (470 nm) LED String – 3 LEDs
*Use this string of LED in combination with your Apex system and Lunar Simulation Module (LSM)
When you purchase the Apex Controller and Lunar Simulation Module you need to outfit i...
The PM2 probe module, includes support for conductivity (salinity), temperature, and 6 digital inputs. The PM2 features are:
Monitor/Control Conductivity and temperature.
6 digital inputs for float switches, water on floo...
The newly announced MPR - Magnetic Probe Rack is the perfect product for anyone with an existing Apex or those just now picking one up. The MPR has four locations for probes so customers can rig up their pH, ORP, salinity, and tem...
3’ Male/Male AquaBus cable. Used to connect an AquaBus module (PM1, EB8, etc) to another AquaBus Module or Apex base unit.
WAV - Extreme flow for your aquarium
The WAV moves water. Plain and simple. More than 4000 gallons per hour of it! Better yet, for the same amount of flow, the WAV is smaller, uses less power, and is quieter than the most popula...
Continuous light-level monitoring for your aquarium
With the PAR Monitoring kit you can monitor and log your aquarium’s light levels 24 hours a day through your Apex! The perfect tool to fine tune your lighting on your tank. No...
A multi-purpose dosing and fluid delivery system of uncompromising quality combined with the simplicity of Apex Fusion software wizards for operations such as:
2-part dosing (Calcium and Alkalinity)
Other additives dosing
15’ Male/Female AquaBus cable. Extension Aquabus cable used to lengthen AquaBus cables so that modules which are more than 15’ apart can be connect together.
Combination stream and light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the cable contains 1 Din5 connector used t...
Easily add float switches, water on the floor sensors, etc. to the Apex, Apex Lite, Apex Jr (either PM1 or PM2 module also required) , AquaController 3, or AquaController 3 Pro. Simply plug the Breakout box`s minidin 8 cable into...
Neptune Systems EnergyBar 8 The EnergyBar 8 module from Neptune Systems features 8 independently controllable outlets. With power failure detection, active electrical current monitoring, and failsafe features make this power ...
The EnergyBar 4 module features 4 independently controllable outlets. With power failure detection, active electrical current monitoring, and failsafe features make this power bar far better than any competing units.
For years the Apex has given owners of the AI Sol lights a great way to control their tank lighting. Now, owners of AI Vega, Hydra or Hydra Fifty-Two will finally be able to wirelessly control their lights through their Apex syste...
The Wireless Expansion module allows for truely flexible control of Ecotech Marine Vortech and EcoSmart wireless pumps. The WXM features are:
Wirelessly controls any of Ecotech`s wireless pumps (WWD or EcoSmart ).
The first expansion module, the PM1, with a pH or ORP, temperature, and 6 digital inputs.
4 in 1 goodness with this module!
The PM1 probe module is just what you need if you want to monitor pH or ORP in your tank. And, the...
The Advanced Leak Detection module easily connects to any Neptune Apex System (Apex, Lite, or Jr.) and gives you up to four locations of leak detection.
Two different types of leak detection probes are available (sold separate...
This leak detection probe, when combined with the ALD (Advanced Leak Detection) Module, will enable your Apex System to alert on any leak or water on the floor.
This particular probe is weighted and is perfect for placing on any...
The Lunar Simulator Module (LSM) allows the AquaController to control and vary the intensity to a 2 to 5 LSM Lunar LED String for a realistic moon cycle simulation. The moonrise and set times follow the true lunar cycle. LSM Lun...
The Variable Speed/Dimming module allows for the control of the Aqua Illuminations LED lighting systems as well as adding an additional 4 0-10V variable speed ports.:
Independent control of the white and blue Aqua Illumination...
The Automatic Feeding System (AFS) is the only automatic fish feeder designed specifically to work with the Apex AquaController. Not only does it seal your food to keep it dry, but it meters out small amounts of food on the schedu...
2 Channel light dimming cable for Apex variable speed ports. It has 1 RJ45 connector on one end of the cable which plugs into the Apex base unit. The other end of the 6’ cables have bare wires which connect to 0-10V di...
2 Channel AquaSurf or Apex to stream cable assembly. It has 1 RJ45 connector which plugs into the Apex base unit, and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.
Oxyguard Dissolved Oxygen Probe
0 to 19.9 ppm
Lab quality probe w/ 10ft cable
Temperature, Altitude, and Salinity Compensation
Mini Din 6 Connector PC Serial Cable In order to connect the AquaController to a PC, ...
120V AC to 12V DC Power Adapter for use on the AquaController Apex.
Very handy for UPS setups or firmware updates.
The PM3 probe module, includes support for dissolved oxygen, temperature, and 6 digital inputs. The PM3 features are:
Monitor/Control Dissolved and temperature.
6 digital inputs for float switches, water on floor sensors,...