Operation in night mode with Singlecontroller 7091 ; contained in Multicontroller 7094 as a standard. Currents are an energy of life in your aquarium. Turbelle ® electronic circulation pumps are controlled electronically. TUNZ...
Feature(s): Rough surface for the inside for the Tunze magnets 77mm x 59mm (3.0" x 2.3") For 220.53 , 220.54 , 220.55 and 220.56 magnets
The Tunze CO2 Controller Set (7074/2) consists of pH Controller 7070/2, CO2 valve kit 7074.11 (including power supply unit 5012.01). The pH controller precisely monitors the pH of the aquarium and opens or closes t...
The Tunze Water Level Alarm (7607/2) has three sensors: one run-dry protection sensor and two overflow sensors. Each sensor comes with a holding device which can be stuck with silicone or clamped to horizontal or vertical pan...
TUNZE STORAGE CONTAINER 5002.25 Container with a capacity of 27 L (7.1 gallons); large cover opening to facilitate topping up and cleaning. Size for an open 600 l tank: fill lasts for approx. one week ø 34 x 43.5 cm For use...
Tunze Cleaning Solution for pH, mV (ORP), and conductivity probes.
TUNZE OSMOLATOR UNIVERSAL 3155 - auto top-off system High-Tech, just for a reliable water level in your tank In 1985 TUNZE® invented the “auto top off” system. Critics initially derided the idea as an invention for lazy people...
TUNZE® Multicontroller 7096 is a control device for all Turbelle® and Stream® pumps fitted with an electronic motor, which can be adjusted by computer when attached by USB cable. It features a 8-Bit high-performance microproces...
Complete cleaning set for aquarium pumps, filters and skimmers in a plastic container. Contents: Special cleaning brushes, various tools especially for Turbelle® pumps, cleaning cloth, spray bottle for citric acid solution, conce...
Feature(s): for use with Turbelle Stream 6000, 6060, 6080, 6100 made of white ceramic stone and is suitable for freshwater as well as salt water aquariums. for decorative integration in the aquarium
TUNZE® Magnet Holder 6080.50 and 6200.50 are used to attach all Turbelle® pumps and Comline components. This patented holding device has a very high holding power, and can be used to attach all other TUNZE® devices to the aquarium...
TUNZE® Multicontroller 7095 is a digital control unit for all Turbelle® pumps fitted with electronic motors. Multicontroller 7095 can control up to four Turbelle® pumps and contains an LED moonlight with a 29-day moon phase. A The...
The TUNZE magnetic glass cleaner are corrosion resistant and may remain in the aquarium without any adverse effect on your aquarium biotope. They consist of a lower section with a rough surface and an upper section with a felt or ...
Replacement Metering pump for Osmolator or Osmomat Metering pump capacity: 2.95ft: 13.74gph, 4.92ft: 12.42gph, 6.56ft: 7.13gph Max. Height: 7.22ft This pump runs on 9 volts DC
TUNZE® Aquawind is an especially low-noise aquarium ventilator provided with a 5 V low-voltage power supply unit. Moreover, it comes with an attachment means, which can be used for every aquarium edge up to 25 mm (.98 in.). It pro...
Feature(s): 10 pieces (5 pairs). with arm protection ideal for work in an aquarium (e.g. protection against nematophores)
Tunze Ion Exchanger This additional filter can be fitted to the outgoing water outlet of the RO Station as a water hardener or silicate filter. The tank contains two screw caps with plug-type connectors for the hose of the osmo...
Tunze pH Calibration Kit 7040.14 pH 5, 7 and 9 buffer solutions for calibrating pH Controllers / Monitors.
Tunze Conductivity Calibration Solution - 7030.14 For saltwater use 50ms/cm
Tunze LED 8810 is a unique, high efficiency LED light that features a waterproof enclosure and has no failure-prone and noisy cooling fans. It is passively cooled by its unique design and thermally-conductive plastic housing. Fu...
Tunze Felt Acrylic Pad for Algae Magnets, 220.568 This soft fleece is an add-on for the rough surface of the inside magnets: 220.53 , 220.54 , 220.55 , 220.56 . Aquariums with acrylic panes can be cleaned gently with t...
The Tunze mV(ORP) Controller Set, 7075, consists of mV controller 7071/2 and switched socket outlet 7075.11 (including power supply unit). The mV ORP controller precisely measures the ORP of your tank. A high-quali...
Tunze Temperature Controller Set (7028/3) This temperature controller can accurately monitor the tank`s temperature and control a device (either a heater or a chiller) to maintain that temperature. Switching ...
TUNZE CONDUCTIVITY METER 7032/2 The Tunze Condictivity Meter will accurately monitor the salinity of the water (translated from conductivity). It can be used for freshwater, brackish water or saltwater. The unit&nb...